Filter By:
- Rigid (111)
- Suspension (134)
- Show More Brands
- Show Fewer Brands
Forks

$210.00 - $322.00
An entry level fork with the latest features and performance; Judy Silver is built around a brand new chassis derived from the Pike, works with Plus tires up to 2.8 in both the 27.5" and 29" models. Judy Silver features the Motion Control RL damper and is compatible with OneLoc remotes and has Fast Black upper tubes for an all-black look and low friction performance.
- 80-120mm travel
- External rebound
- TurnKey lockout controls
- Fast Black upper tubes
- Motion Control RL damper
- Compatible with OneLoc remote
- Solo Air spring

$579.00
With bigger bikes come bigger demands. The new Domain takes cues from ZEB, our enduro specialist fork with serious credentials. Domain offers a new burly 38mm chassis, short fender compatibility, and a confidence-inspiring DebonAir air spring matched with a reliable Motion Control RC damper. We even brought the performance of Maxima Plush damping fluid along for the ride. Nothing goes as big as Domain does in value and performance.
- 38mm chassis for increased stiffness and rider confidence
- Motion Control RC damper featuring low speed compression adjust with externally adjustable dual-flow rebound
- Highly tunable DebonAir air spring offers a consistent feel throughout the travel
- Maxima Plush damping fluid reduces friction and quiets damper noise
- Short fender compatible. RockShox premium fender sold separately. AM Variants include RockShox zip-tie fender
- Fits tires up to 2.8" without fenders—use of any fender may reduce tire clearance

$268.00 - $376.00
With optimized material concentrated at the brace and seal area, outstanding stiffness and steering precision, and new E-MTB configured fork options with fender mounting points, Recon Silver is an all-around performer suited for any MTB or E-MTB bike.
Features
- New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (15x110mm version)
- New graphics are easy to read and make a fresh impact
- Motion Control damping featuring low-speed compression adjustment to lockout
- Fit Tires up to 2.8" (15x110mm version without fenders; the use of a full fender will reduce tire clearance)
- Fast Black finished 32mm steel upper tubes couple stiffness with a premium look

$843.00
- 35mm chassis with a focused all-mountain mindset - satisfyingly stiff, efficient and designed to eliminate as much weight as possible.
- Charger RC damper featuring Low Speed Compression adjust
- DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep.
- RockShox premium short fender included
- Maxima Plush damping fluid reduces friction and silences damper noise

$474.99
The Circus project started as a way to get our slopestyle riders into competition, but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade.
- 80/100mm or 120/130mm Internally Adjustable Travel
- Air Spring
- ABS+ Compression Damping w/ Jump Stack
- Adjustable TPC Rebound Damping
- Wheel Size: 26"
- 130mm travel models can be reduced to 120mm and 100mm models can be reduced to 80mm travel using included spacers
- 20mm hex axle provides superior torsional stiffness
- Absolute+ cartridge platform oil damping system: specifically tuned for Dirt Jumping
- Forged I-beam style crown: bigger, stronger, and more durable
- Alloy steerer, and 32mm aluminum stanchions

$499.99
The Circus project started as a way to get our slopestyle riders into competition, but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade.
- Air Spring
- ABS+ Compression Damping w/ Jump Stack
- Adjustable TPC Rebound Damping
- 130mm travel models can be reduced to 120mm and 100mm models can be reduced to 80mm travel using included spacers
- 20mm hex axle provides superior torsional stiffness
- Absolute+ cartridge platform oil damping system: specifically tuned for Dirt Jumping
- Forged I-beam style crown: bigger, stronger, and more durable
- Alloy steerer, and 32mm aluminum stanchions

$299.99
Handles terrain like a goat. Just because you're on a budget doesn't mean you can't ride a suspension fork that gives you excellent, smooth control. The Markhor features our KwikToggle damper with easy on/off lockout. With travel between 100mm and adjustable to 120mm, 80-100mm on (26"), the Markhor fork smooths out any line the trail puts in front of you.
- 100mm or 120mm Travel
- 80-100mm on (26")
- TS Air Spring
- Kwik Toggle Compression Damping
- TPC Rebound Damping
- 30mm aluminum stanchions with aluminum steerer
- Cost-effective, lightweight air spring fork that features the same Twin-Piston Chamber (TPC) rebound damping as the more expensive Manitou forks

$799.99
The Circus project started as a way to get our slopestyle riders into competition, but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade.
- Dorado Air Spring
- ABS+ Compression Damping w/ Jump Stack
- Adjustable TPC Rebound Damping
- 130mm travel models can be reduced to 120mm and 100mm models can be reduced to 80mm travel using included spacers
- 15mm hex axle provides superior torsional stiffness
- Dorado air spring with fixed Hydraulic Bottom Out
- Absolute+ cartridge platform oil damping system: specifically tuned for Dirt Jumping
- Forged I-beam style crown: bigger, stronger, and more durable
- Alloy steerer, and 34mm aluminum stanchions

$424.99 - $464.99
The Machete is purpose-built for slicing trails, with Kwik Toggle compression damping inspired by our renowned Absolute+ technology. Kwik Toggle achieves on/off lockout simplicity in a lightweight, practical package.
- TS air spring with in-leg adjustable TPC rebound damping
- Kwik-Toggle damper with lockout, adjustable rebound, and high-speed compression
- 32mm black anodized stanchions with hollow bore forged aluminum crown
- Easily upgradeable to remote using MILO upgrade kit part #314934
- Travel is internally adjustable from 80 to 120mm in 10mm increments
- Disc brake only (74mm/6" post-mount)
- 27.5x3.0"/29x2.5" maximum tire width

$579.99
The Mattoc is an amazing fork due to its versatility yet made even more amazing as its capability to do it all comes without compromise. The “versatile specificity” of this fork means that it adapts perfectly to many disciplines and styles of riding while performing flawlessly in each and every one. The Mattoc Comp’s 34mm Manitou-engineered chassis keeps weight to a minimum while maintaining best-in-class stiffness. Its Expert Air spring with IVA technology, ABS+ compression damping, and in-leg adjustable TPC rebound damping make for the smoothest ride you’ve experienced yet. With air, air volume, rebound, and compression adjustments that smooth ride can be tailored to your specific needs. The next step to a better ride starts with Mattoc, #thepeoplesfork.
Key. Features:
- 27.5” is 20g less than the previous model.
- Expert Air allows for internal travel adjustments with no added parts.
- Expert Air spring systems contain a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. Expert Air has identical performance to Dorado Air in a more cost-effective package.
MATTOC COMP
- Incremental Volume Adjust (IVA) modifies the volume in the positive air chamber with self-contained spacers dictating the position of the IVA piston. This allows the main air spring ramp-up to be tuned to the rider's weight, style, and conditions without the need for additional parts.
- Absolute Plus (ABS+) is a shim stack-based damper that features external incremental Low-Speed compression adjustment.
- 27.5” 110-150mm, 29” 110-150mm.
- TSR (Trail Side Relief) casting bleed screws allow users to release casting pressure from the fork. Casting pressure increases during normal riding. Extreme riding can increase the pressure at a quicker rate. Temperature and elevation changes can also cause increased casting pressure. Releasing casting pressure can improve overall fork feel and small bump compliance.
- Expert air spring and lower weight bring top-level performance to a new price point.
Product Details:
- Incremental Volume Adjust (IVA) allows customized ramp-up specific to the rider or the conditions with self-contained spacers
- Black anodized 34mm 6000 series alloy stanchions
- 1-piece magnesium, reverse-arch 34mm taper-wall lower legs with 15mm Hexlock SL (tooled) thru-axle Compatible with MILO remote lever (part #992329)
- Disc brake only (74mm post mount/180mm rotor)
- 27.5x3.0"/29x2.5" maximum tire width

$799.99 - $849.99
Featuring 37mm stanchions, home mechanic-approved travel adjustability from 180mm to 140mm, and our easy-to-use VTT-6P damper, the Mezzer Expert is the smart choice for anyone looking to dive into the Enduro Fork market. Should you later decide you would like more adjustability from your fork, factory upgrades such as IRT and MC2 are available and can be easily installed in your own garage. At 2030g this fork is the second lightest option available within the Enduro fork market, second only to the Mezzer Pro of course.
Key Features:
- 37mm stanchions, Reverse Arch design, and Hexlock SL2 axle combined together result in ultimate stiffness
- Expert Air offers ultimate sensitivity featuring a self-equalizing negative air spring.
- IVA (Incremental Volume Adjuster) allows you to modify your positive air chamber volume by rearranging self-contained spacers. You'll never lose a volume spacer again.
- VTT-6P damper provides 6 easy clicks to dial in your damping for all types of terrain.
- Integrated fender can be installed/removed by three small screws threaded into the arch of the fork.
- TSR (Trail Side Relief) valves on the back of the lower legs allow you to bleed off built-up air within the lower legs to keep things butter smooth between service intervals
Product Details:
- VTT-6P damper provides 6 clicks to tune damping for all types of terrain
- 37mm stanchions, Reverse-Arch design, and Hexlock SL2 axle for the ultimate stiffness
- IVA, Air Volume Adjustability by rearranging self-contained spacers
- TSR, Trail Side Relief valves on the back of the lower legs allow air to be bled off if it builds up within the lower legs to keep things butter smooth between service intervals
- Internally adjustable travel from 180mm to 140mm in 10mm increments with included spacers
- 2.6" maximum tire width

$749.99
Rebirth of an Icon.
The R7 has a vast history of combining a lightweight chassis with performance and reliability. And this latest incarnation of the icon is no different. The new R7 expert pairs superior damping thanks to our 3-position dual piston VTT damper with a lightweight and stiff 32mm chassis.
- VTT damper with compression open mode and rebound adjustability
- 32mm black anodized 6000 series aluminum stanchions with Reverse-Arch design
- Internally adjustable from 120 to 80mm in 10mm increments
- Available in two different offsets 44 or 51mm

$1,299.99
Coil Fans Rejoice!
Once again, the Dorado is available with a coil option. The new Dorado Comp features the same 37mm chassis as the Expert but with a more set-it-and-forget-it vibe. The coil spring provides a smooth consistent feel 100% of the time with 0% of any hassle. On the damping side of things, our ABS+ Damper offers a great adjustment range, terrific reliability, and easy serviceability. The Dorado Comp is built for riders who just want to ride and not sweat any of the small stuff.
Key Features:
- New 37mm chassis results in a massive increase in stiffness and ride quality. The new chassis is 20% stiffer compared to our former 36mm version.
- Inverted Design provides an incredibly smooth and consistent feel due to constant lubrication of the bushings and seals. The inverted design also provides a major increase in fore-aft stiffness compared to traditional forks while maintaining torsional compliance which provides more control to the rider over rough terrain.
- Coil Spring provides maximum bump sensitivity and simple service procedures. The standard spring rate provided in the fork is a medium rate of 35lb/in. For tuning, there are six spring rates available for this fork; 25lb/in, 30lb/in, 35lb/in, 40lb/in, 45lb/in, and 50lb/in.
- ABS+ damper is known for its incredible reliability and easy tunability. Adjustments include a low-speed compression adjustment and a low-speed rebound adjustment.
- Fits both 29" and 27.5" wheels. Markings on the outer legs indicate the proper clamping point for the ideal axle to crown measurements depending on wheel size. The fork legs can be used with both wheel sizes.
- Two Crown Options are available with this fork. The 47 offset is designed to work with 27.5" wheels and intended axle to crown. The 57 offset crown is designed for 29" wheels and axle to crown. For those looking to run the lower offset crown with 29" wheels please reference our fit document to see if your headtube length is compatible.
- TSR Bleed Screws allow you to release excess pressures built up in the outer legs of your fork while riding keeping your fork smooth and supple all day long.
Product Details:
- 37mm 6000 Series Aluminum stanchions with carbon fiber legs
- Externally Adjustable: high-speed compression, low-speed compression, and rebound
- Dorado air spring with IRT (Infinite Rate Tune) volume adjuster allows the rider to adjust mid-stroke support and bottom-out progressivity independent of initial spring rate
- TPC+ Damper with HBO (Hydraulic Bottom Out)
- TSR Bleeders
- Includes removable bolt-on fender

$949.00
Designed not only for the race down but the also ride up. Holding onto every critical line, Lyrik Ultimate features an updated DebonAir air spring paired with our Charger 2.1 damper for unmatched trail control and precision. Ultra-low friction SKF wiper seals and Maxima Plush damping fluid all work overtime to reduce friction, silence noise, and provide unmatched fork performance sunup to sundown.
- Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain
- Designed to reduce hand fatigue and fight unwanted friction, the Charger 2.1 damper increases confidence and control over every trail
- Charger 2.1 RC2 damper featuring independent high and low-speed compression adjust
- Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel
- Maxima Plush damping fluid reduces friction and silences damper noise
- Ultimate foil graphics package

$129.99
Get back on the road with a genuine replacement fork.
The fork you need.
- Original replacement fork
- Color matched for direct compatibility

$144.99 - $169.99
Made from revised 100% Cult Classic tubing for increased strength and then 100% post-weld heat treated. 1-pc machined steerer tube with an integrated bearing race, tapered legs, and plenty of tire clearance.

$1,099.99
The versatility of the Cane Creek HELM continues with the new HELM DJ.
The new Cane Creek HELM DJ combines the proven performance, reliability and strength of the HELM MKII's chassis with a new short travel air spring optimized for Dirt Jumps, Dual Slalom and Street riding.
Preset at 90mm travel and a 483mm axle to crown to accommodate a 26" wheel without changing the geometry of your dirt jump bicycle.

$144.99
Made from revised 100% Cult Classic tubing for increased strength and then 100% post-weld heat treated. Investment cast 1pc drop outs for maximum strength and a super sleek finish. Features an updated top cap retention design.
- 1-pc machined steerer tube with an integrated bearing race
- Tapered legs
- Tire clearance for 2.40” tires
- Updated top cap retention design

$199.99
Genuine replacement parts
Get back on the road with a genuine replacement fork.
The fork you need.
- Neutral service replacement for disc brake monoshock fork
- Adjustable pre-load
- 300mm Steerer Length

$69.99
Get back on the road with a genuine replacement fork.
The fork you need.
- Original replacement forks for Electra Cruiser 7D Step-Thru 26" bikes
- Color matched for direct compatibility

$59.99
Get back on the road with a genuine replacement fork.
The fork you need.
- Original replacement fork
- Color matched for direct compatibility

$69.99
Get back on the road with a genuine replacement fork.
The fork you need.
- Original replacement forks for Electra Cruiser 1 Step-Over 26" bikes
- Color matched for direct compatibility

$376.00 - $408.00
Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Gold level gives you aluminum upper tubes and Motion Control damping.
Features
- New graphics package with E-MTB endorsement option (15x110mm)
- Motion Control damping featuring low-speed compression adjustment to lockout
- Fits Tires up to 2.8"
- Fast Black finished 30mm aluminum upper tubes couple stiffness and lightweight with a premium look
- Highly tunable Solo Air spring

$469.95
With more than 40 years of designing and building bicycles and components dedicated to adventures that go beyond limits or expectations, Tom created the new Ritchey WCS Adventure Fork for those of us that are unbound by the constraints of riding-surface type, seemingly insurmountable distances, or what you can carry on your bike.
The new one-piece carbon monocoque WCS Adventure Fork has been meticulously engineered and painstakingly built to perform with razor-sharp accuracy, deliver a high level of comfort, and offer practical features for all manner of cycling adventures. Built with High Modulus Fiber (HMF), this impeccable adventure fork offers superior strength while also reducing road chatter fatigue on those endless days and nights in the saddle. Smooth internal fiber flow in the crown/steerer area delivers the best force transfer from the crown to the shaft and offers increased impact strength for those potholes you didn't see.
With your desire to ride far and long in any condition or under any circumstance, the WCS Adventure Fork features rack mounts for packs full of gear and fender mounts to keep the grime off you and your bike. The three multi-purpose mounts on the legs give you more places to stow the necessities you gather at the last cafe.
Welcoming flat-mount disc brake calipers, the WCS Adventure Fork also fits up to 48mm tires (depending on tire make and model)—making this fork the ultimate addition to any rig assembled for the purpose of seeking, discovering, and enjoying the adventure.
- Material: carbon fiber
- 1-1/8" straight steerer with integrated 45-degree crown race
- Fits 1-1/8 and 44mm headtubes with appropriate headsets
- 100x12mm thru-axle (included)—(100x15mm thru-axle conversion kit available separately)
- Flat Mount disc brake
- Disc brake rotor compatibility: 140 / 160mm
- Steerer length: 300mm
- Axle-Crown: 393mm
- Rake/Offset: 50mm
- Spacing: 60mm
- Minimum tire clearance: 4mm Road / 6mm Off-Road
- Wheel compatibility: 700c / 650b
- Rack and fender mounts
- Multi-purpose mounts on fork blades (includes black stainless-steel bolts)
- Fork max payload: 3kg per side
- Weight: 445g (with uncut steerer / not including axle)

$949.00
With a FLOAT EVOL air spring and on-the-fly compression adjustability, 32 Taper-Cast Factory delivers just enough tunable travel to take the edge off of wherever your gravel adventures may lead you.
- 700c chassis with clearance for large volume tires (50 mm max)
- Kashima Coated 7000 series aluminum stanchions and 12x100mm bolt-on thru axle
- FLOAT EVOL Air Spring and FIT 4 damper, featuring three on-the-fly settings - Open, Medium, and Firm
- Lightweight air spring optimized for short-travel
- Lightweight 32mm Step-Cast chassis with Lower Leg Air/Oil Bypass Channels
- Integrated full fender mounts (700c x 45 mm max with fender)

$1,139.00
36 E-Optimized Factory forks are made specifically for the rigors of E-Bikes with a stouter chassis and longer durability due to adding material to strengthen critical areas. The design also uses tuning originally done for Enduro use, which fits the needs of the E-MTB and overall E-Bike uses.
- Genuine Kashima Coating on upper tubes
- FIT GRIP2 Damper and FLOAT air spring
- E-Bike Chassis
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment

$1,249.00
FOX 38 Factory Series Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability.
- The floating axle offers a distinct performance advantage due to its unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs
- Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality
- The 38 Fork comes equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release
- Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping
- Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button
- The 38's lower leg arch design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding

$1,039.00
Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Factory rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor.
- Genuine Kashima Coating on upper tubes
- 32 mm upper tubes and ample bushing overlap for a quality ride
- Hollowed out lower legs provide even more weight savings
- FIT4 damper and FLOAT air spring

$1,049.00
Own the mountain with the award-winning 36 Performance, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Black anodized upper tubes
- FIT damper and EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment

$1,149.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Genuine Kashima Coating on upper tubes
- FIT damper and FLOAT EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
- Updated Crown Design saves up to 20 grams, and offers significant structural improvments