Packs/Racks/Baskets

Axiom's Transit Rack is your trusty friend when it comes to hauling gear. It's tough, it's light and it can hold panniers. Use it to commute, tour or just head to class. It handles heavy loads easily and acts a fender as well.

Banjo Brothers' Handlebar bag is loaded with clever features. It's made from tough, water-resistant fabric with a flip-up clear map pouch plus plenty of interior and exterior pockets for organization. Stability is top notch thanks to its secure Velcro attachments, rigid interior support and secondary strap that attaches your fork's eyelets. It even fits suspension forks with an included alternate strap. Reflective accents all the way around give you visibility and you've got a clip for attaching a blinkie.

If you'd prefer to carry your gear in a bag rather than stretching out your jersey pockets, Banjo Brothers' Large Seat Bag is perfect for you. It'll hold a tube, tire levers, patch kit, a mini tool, your wallet, some food, even a wind vest or camera (each sold separately). And if you're going big, it expands to haul more gear. It's made from heavy-duty 840-denier nylon with a wide-opening design for easy access. And you've got 360 degrees of visibility with reflective accents and a rear tab for a blinkie.

Gear up and go long. Axiom's Journey Suspension & Disc Lowrider Front Rack gives you lots of extra carrying capacity. Designed for bikes equipped with front suspension bike and disc brakes, the Journey Suspension rack installs easily and assures excellent clearance so your load doesn't interfere with your bike's functions. With increased height for improved cornering and ground clearance, the Journey is perfect for going deep into the backcountry. It is made of light, rugged aluminum and handles heavy panniers (sold separately) with ease.

Planet Bike's Eco Rack is made of oversize tubular 6061-aluminum for maximum strength and stability. It's designed to provide complete heel clearance when you install packs. And, the pre-installed rack hardware makes it a cinch to mount the Eco Rack to your bike, too. This rack fits most road, mountain and hybrid bicycles and even includes a built-in platform, which doubles as a mini-fender on rainy rides.

While the Mini Tool Kit is the smallest bag in the Jandd line, it is still made to the same strict specifications as Jandd's largest mountaineering pack. - Perfect for minimalists; fits tube, tire levers and mini-tool - Three-point retention system - Main panel is doubled with an extra layer of nylon to prevent premature wear at the seat post - Seams are fully taped to prevent fraying - Made of Dupont Cordura - Weight: 40 grams - Capacity: 24 cubic inches

Ultra durable outer showcases a ‘carbon-look’, stylish matte finish. Modern material deflects the elements maintaining high resistance to wear, perspiration and electrolyte drinks. The silver-colored interior makes it easy to see what’s inside quickly so you can turn your focus back to the road ahead. Mounts to top tube via stem/top tube straps. - Capacity: 20.4 in3 (334 cm3) - Weight: 2.3 oz (66g)

The Gas Tank is a high-end, high-volume top tube bag for carrying a ton of food and other gear. It offers substantial storage in an easy access case. Zip open a side for one-handed access while riding or open up both when stopped for full panel access to the contents. Fill it with M&M's, tools, a camera, bear spray, and whatever you need to have close at hand. Features: - One-handed zipper access while riding - Wrap-around, water-resistant zipper to keep your gear dry - Fully padded with closed-cell foam - Interior lined with yellow fabric for greater visibility - Hook and loop interior divider for organizing small stuff - Adjustable height daisy chain front attachment with a spacer block to clear stem clamp bolts - Top tube strap has gripper material with double back wrap for bomber stability - Made in the USA with domestic and imported materials. Sizing: - Length: 9" - Height at stem: 5" - Width at stem: 2.5" - Tapers down to 1.5" tall and 1.5" wide along the top tube Specifications: - Weight: 3.5 oz. - Volume: 70-80 cu. in. - Materials: VX42 X-pac, 1050-denier domestic ballistics nylon, 420-denier yellow lining, closed cell foam padded tube sections

The Egress Pocket is a waterproof, seam-welded, roll-top handlebar bag. It integrates with the Sweetroll and Harness, or can be used standalone on the handlebars with the included strap kit. The side profile of the Egress is curved slightly to contour around the main drybag so the bags nest well when the straps are tightened. This bag was built with the distance traveler in mind. It features a removable padded liner, giving you the option to protect electronics when the bag is removed and dropped at camp. The liner also features a small zippered pocket. On the outside, the Egress has a small carry handle and D-rings to attach a minimalist shoulder strap (included), making it a versatile travel companion. A jacket or extra layer can then be stored in the straps that typically attach it to the Sweetroll & Harness. Lastly, you can even run your belt through a series of webbing slots turning it into a hip pack. The webbing and hook closure with high-cycle-life Velcro make for a secure and durable closure. Features: - Waterproof - Contoured sides - Roll top closure with hook strap - Removable padded liner - Small zippered pocket in removable liner - Stand alone mounting and off bike versatility - Size: 3" depth 9.5" width 7-8" height - Weight: 10.0 oz complete, 7.5 oz without extra straps and liner removed. - Volume: 175 cu in approx. - Materials: 210 Denier Ripstop Nylon double side laminated with TPU Hypalon reinforcements

Want to bikepack without breaking the bank? Banjo Brothers to the rescue. A huge seat-mounted pack for bikepacking and commuting - no rack required. Usable capacity between 800 cu in and 350 cu in. 800 cu in (13L) – 22 x 7 x 6.25. Can be compressed down to 350 cu in when full capacity not needed. Rigid hull inside front of bag for secure support even when bag isn’t full. Removable waterproof liner. Requires a gap between saddle rails and fender of at least 8". - Weight: 2 lbs - Dimensions: 22.0"L 7.0" H x 6.25" W - Capacity: 800 cubic inches / 13L - Removable waterproof liner. - Requires a gap between saddle rails and tire of at least 8". - Imported

The 100% waterproof Banjo Brothers Pannier Backpack converts from pannier to backpack in seconds and it's the most affordable "backpack pannier" on the market. Bicycle commuters everywhere can rejoice. No stupid gimmicks. The pannier hooks end up opposite the rider's back, making the backpack more comfortable. Not many people know just how stubborn Banjo Eric is. Maybe it's the German in him but for two-plus years, he steadfastly refused to launch a pannier that converts to a backpack into the Banjo Brothers line until the comfort and functionality were 1000% perfect. You, my friends, will be the benefactor of his dogged determination to make a better mousetrap. HOW DOES THE CONVERTIBLE BACKPACK PANNIER WORK? Remove the pannier from the bike. Unhook the panniers main flap and reverse it over the pannier hooks and use the side-release buckles to secure it in place. Backpack straps will be revealed. Put the backpack straps over your shoulders, adjust and you're ready to go. New for 2021 A universal J-Hook designed to work with most racks replaces the triangle ring with dropout hooks. Since the J-Hook is designed to attach directly to the rack, we no longer supply the dropout hooks. For a short time you might find legacy inventory with the older system, however, Banjo Brothers will no longer supply or hold replacement parts for those systems. PRODUCT FEATURES - Weight: 3.1 lbs - Dimensions: 15.5" H x 11.5" L x 6.75"D - Capacity: 1100 Cubic Inches / 19 liters - What size laptop will this bag fit? 10.5" x 16" (generally 15" laptops) - Sold as: single pannier - Two-layer design with a ballistic outer layer and welded-seam liner that is fully replaceable. - What does the inside of the bag look like? - What will it hold? Generally, this is an ideal bag for bike commuters. It holds extra shoes, lunch, change of clothes, and your computer. - Flap pockets and side pockets - Reflective piping and striping - Places for flashing lights on the pannier and backpack sides - Outer quick-access flap pocket and two side pockets - Included handle and two backpack straps - Imported

Square top-tube boxes are not aero, so step in the Rocket Pocket! The streamlined design of the Rocket Pocket eliminates stem drag. The non-slip surface underneath provides sturdy nutrition storage. An easy-slide rubber zipper pull allows for a quick, easy open and close to keep your focus on the road. Silver interior lets you find your nutrition or salt tablets quickly. It can fit the longest energy bars

Carry just the essential roadside/trailside tools with the MSW Tool Hugger. Sleeves are designed to fit tire levers, CO2, inflator, patch kit, multi-tool, and a tube (all sold separately). Works well standard saddle rails, or just toss it into a jersey pocket. - Durable Cordura outer layer - Seven elastic tool compartments - Hook and loop closures

NEW: MOUNT NOT INCLUDED From January 2022 onward you must choose the handlebar mount that is right for your bike. Up until now we have supplied handlebar bags together with our standard bracket, but now you can order your individual mounting set separately so you can choose a mounting system that suits your needs. The waterproof Ultimate Six Plus handlebar bag is the perfect place to stow your things while keeping them at the ready whenever you need them. Depending on the model, this durable handlebar bag made of waterproof Cordura fabric has a payload of 5.7 or 8.5 liters, offering you the space you need for items you need to be able to access quickly. The smallest of the Ultimate Six Plus models distinguishes itself in terms of its transparent, user-friendly and rainproof flap compartment with a 21 x 12-cm interior that enables to secure your smartphone, GPS device, and roadmap. You can naturally operate your touchscreen device through the transparent cover. The two larger models enable the use of different inserts in case you want to stow any special gear such as your high-performance camera while you're underway. What all three models have in common is convenience. You can open the flap with a single hand, thanks to its magnetic closure, and closing it again is virtually automatic. The detachable shoulder strap transforms your handlebar bag into a convenient shoulder bag as soon as you reach your destination.. - Maximum payload: 5kg - Zippered inside pocket with carabiner for keychains - Air vents in the flap compartment prevent device overheating - Reflector made of high luminosity 3M Scotchlite material on front of bag - Accommodates the attachment of a map case and Safe-it in sizes S to XL

The Lizard Skins Utility Strap is an easy way to stow essential tools and a spare tube. The minimally designed Utility Strap is a lightweight on-bike storage solution for any rider. This versatile system is made to securely attach under seats and other locations on bike frames. The Utility Strap has a wide strap and durable metal buckle. - On-bike storage solution - Inner sleeve to compress the tube - Multiple spots for tools: CO2, Tire Lever, Multi-tool, etc. - Wide strap and durable metal buckle - Silicone and rubber grip for stability - Compact and lightweight - Attach under the seat or other locations on the bike frame - Weight 4oz

Bikepacking is also about embracing minimalism. You head off on your bike into the great outdoors, away from it all for an extended period. The amount of gear you can take is limited! The ORTLIEB Frame-Pack allows you to exploit your bike frame to create valuable stowage. Thanks to its lower center of gravity below your top tube, the Frame-Pack makes for an ideal stowage location for heavy gear such as tools, camping stoves, and food supplies. The proven, waterproof nylon fabric and the waterproof zipper ensure that your things remain absolutely dry even in the most inclement weather. Mounting the Frame-Pack with the ultra-strong Velcro straps to the top tube, seat tube, and down tube is a snap. The Frame-Pack is available in a 4-liter size and a 6-liter size – depending on the size of your bike frame.

The waterproof ORTLIEB Handlebar-Pack is an indispensable item when you’re on a bikepacking tour in the great outdoors. This Handlebar-Pack offers a payload of either 15 liters for your sleeping bag and pad. It also helps to secure a balanced distribution of gear and weight across your bike. Thanks to the roll closures at both ends, you can always gain quick access to your gear. Compression belts on the outside enable the stowing and attachment of additional equipment. Moreover, the Handlebar-Pack comes with four hooks to enable the attachment of an ORTLIEB Accessory-Pack for additional storage space. Consisting of spacers and two strong Velcro straps, the mounting system ensures secure attachment to any handlebar type, including carbon handlebars. The pack’s stiffened interior and head-tube attachment offer additional stability – in any terrain. FURTHER FEATURES: - Hooks for attaching an ORTLIEB Accessory-Pack - Also suitable for carbon handlebars - Mounting straps with convenient Velcro closures - Lightweight design - High luminosity 3M Scotchlite reflectors

The ATTK-S Soft-Side Top Tube Bag offers high-quality construction and a range of options for mounting. It offers easier access than hard-sided top tube boxes through more flexible materials and a splash-proof double zipper. It is a versatile addition for any cycling discipline when you want to carry items on the bike instead of in your pockets. - Splash-proof zipper - Waterproof fabric - Front strap attachment - Anti-Slip base - Can be mounted with straps or direct mount - Dimensions & Spec / Capacity: 264mm x 73.5mm x 40mm / 383ml - Top Tube Compatibility: Direct mount (M5 Bolt) or Velcro - Weight: 43g

Carry your cargo in style. You have things. We have things to hold those things. Take your stuff everywhere...whether it's beach towels, books, or beverages. - Made of rattan (natural reed material) - Handlebar-mounted with leather, buckle straps - Weight: 609g

The Salsa EXP Series Anything Cradle Front Pouch makes it easy to access the gear you rely on throughout the day on a bikepacking adventure. This pouch features fully welded construction for day-in, day-out use, and a buckle attachment design that fully integrates with our EXP Series Anything Cradle and EXP Series Dry Bag. - Keeps your ride essentials in easy reach - Designed for use with our EXP Series Anything Cradle and EXP Series Dry Bag system - Extremely weather-resistant welded design

The EXP Series Full Suspension Framepacks create storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. They’re built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. These framepacks are designed to fit specific Salsa suspension frames perfectly. Check the EXP Framepack Sizing Chart for fit information. - Single compartment for larger items with driveside opening - Sewn-in zipper for long-lasting durability and easy-to-use loop zipper closure - Built with materials to help maintain the pack shape and to prevent billowing - Waterproof fabrics and water-resistant construction - Padded in key areas to protect contents - NOTE: Designed for the V3 (2019) Spearfish and Horsethief. This bag does not fit previous generation Spearfish and Horsethief models.

The EXP Series Framepack creates storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. It's built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. - Weather resistant with fully welded-in #10 YKK waterproof zippers - Internal hook and loop divider for separating gear and managing storage - Exit port along downtube for use with water bladder or lights - Non-driveside flat pocket for storage of maps, tools, phones, wallet, etc. - Tapered at the front and along the bottom for maximum carrying capacity - Fits Woodsmoke, Timberjack, and Fargo bikes

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed around our EXP Series Side-Load Dry Bag, which maintains a fixed height for loading with ease, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly—an essential part of any well-balanced bikepacking setup. - Kit includes Anything Cradle, Side-Load Dry Bag, EXP Series Front Pouch, and two 30" Salsa EXP Series Rubber Straps - EXP Series Anything Cradle Side-Load Dry Bag is fixed-height for easy loading - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Works with or without EXP Series Anything Cradle Front Pouch - Anything Cradle Dry Bags feature a welded seam construction with waterproof materials and hook-and-loop straps for easier installation - Anything Cradle Front Pouch uses water-resistant fabric with welded seams for weather protection - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

This messenger style bag is elevated with modern features tuned to a professional’s needs for cycling and a full workday. From the morning commute to airline travel, this everyday carry keeps necessities well-organized and within reach. The shoulder sling keeps it at your side, or utilize the Travoy trailer's upper deck connection for a bike cargo trailer experience. Features: - Multiple tech compartments including a padded laptop sleeve (up to 15.6") and tablet sleeve for safe and secure storage - Water-resistant fabric with a tarpaulin bottom for additional protection - Suitcase handle sleeve for securing to rolling luggage - Fleece-lined front pocket for smaller valuables - Stowable bag clips (4) for Travoy bike trailer connection - Exterior slip pockets readily accessible for quick stops - Breathable back panel - Internal organization pockets keep everything in its place - Utility clip for keys - Quick-release buckles secure messenger flap - Removable shoulder sling tucks away when not in use - Cross-body strap keeps the bag centered on the back when riding - Light loop for accessory lighting - Compatibility: 2010 – Current Travoy Specifications: - Volume (Liters): 12 - Weight (lbs/kg): 1.7 / 0.77

The Sport-Roller City is a streamlined economy version of the Sport-Roller Classic. The waterproof panniers for lowrider racks are also perfectly suitable as rear panniers for children’s and youth bikes because of their reduced size. The Ortlieb Quick-Lock1 system allows fast and easy single-handed mounting and removal of the panniers, and is suitable for racks with tube diameters up to 16mm. - Hook inserts for diameters of 8mm and 11mm are included -Sold as a pair

Jandd Bicycle Mounted Rack Clamps are for mounting racks with no braze-on points. - Stainless Steel Coated Clamp - Sold as a Pair

- Waterproof (IPX3) - Elastic cord ontop and mesh side pockets - Removable and adjustable shoulder strap - Waterproof lining with roll top - Fastening: 4 straps at bottom - Compatible: MIK system

Fit Kit SET724.R contains all the parts to mount an Old Man Mountain rack to the rigid fork of a road or gravel bike with a 12 mm thru axle.. This kit includes: - 12 x 134 mm thru axle with M12 x 1.5 mm thread pitch - Spacers to reduce the length to 128 mm - A pair of mounting pucks, for bikes without upper eyelets. - Ultra strong and UV stable Panduit Zip Ties - Clear protective tape, for underneath the pucks and Zip Ties - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame If mounting on a Fox Gravel Fork, please also order 377-1240. We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

A sturdy steel rack which allows for mounting Thule Yepp Maxi Easyfit and Thule Yepp Nexxt Child Bike seats. Features - Compatible with most 26" city and hybrid wheeled bikes - Supports up to 35Kg/77 lbs

The waterproof Sport-Packer Plus made of tough Cordura fabric is perfectly suitable as lowrider pannier in the front, "small" rear pannier or for children's bikes. The QL2.1 fixing offers quick and comfortable singlehanded mounting to the rack. - Universal panniers for low-rider racks in the front or rear racks - Abrasion resistant Cordura fabric - QL2.1 mounting system for racks with max. 16 mm tube diameter - 20 mm hook available as separate accessory (e.g. for E-bikes) - Reduction inserts for tube diameters 8, 10 or 12 mm with anti-scratch function preventing abrasion on the rack - Hooks adjustable without requiring tools - Lower hook rail made of two-component hard-soft synthetic with anti-scratch function protecting the rack - Including integrated inner pocket and shoulder strap - Ideal alternative to Sport-Rollers (can be loaded higher due to its lids) - Symmetrical shape allows use on right or left side - Ideal as "small" rear panniers for children's or youth bikes - Simultaneous use of Ortlieb Travel-Biker possible - Possibility to attach the Ortlieb carrying system - Highly reflective Scotchlite reflector - Easy to clean inside