Filter By:
Brakes/Levers/Pads

$25.00
Hope Mono Mini Disc Brake Pads.
· Sintered: high-graphite compound; best for wet weather durability
· Organic: Softer compound than sintered, works better in dry conditions, but wears faster
· Fits Tech and Tech Evo M4 Brakes

$292.25
• On the fly Bite Point Control and Reach adjustment
• Direct compatibility with Shimano I-Spec shifter
• Direct mount available for SRAM shifters
• New piston dust cover design
• New reservoir diaphragm design
• CNC machine in Barnoldswick, England
• 2014 T6 aluminum alloy
• Wide angle hose connector mount
• Floating or vented rotor compatible
• Goodridge braided hose

$217.10
• Rigid CNC'd one piece caliper
• Increased piston diameter
• Tech 3 lever offers 5% more power compared to our previous lever
• Ergonomic design to fit around other handle bar items
• The Tech 3 lever is directly compatible with Shimano I-Spec shifters

$25.00 - $30.00
Hope X2 2-Piston Disc Brake Pads.
• Organic: Softer compound than sintered, works better in dry conditions,but wears faster
• Sintered: high-graphite compound; best for wet-weather durability

$23.38
· CNC machined in Barnoldswick, England
· Includes mounting bolts
· Adds 20mm of disc rotor diameter to dedicated IS calipers for use on post mount forks or frames (i.e a 160mm caliper would require the use of a 180mm rotor)

$63.90
Hope Brake Line kits
· Works for front or rear
· Fits All Hope Moto, Mono, Tech, Tech Evo and Mini Series Brakes
· Length is 1500mm

$250.50
• Rigid CNC'd one piece caliper
• E4 caliper uses 4x16mm phenolic pistons to give more usable power
• Tech 3 lever offers 5% more power compared to our previous lever
• Ergonomic lever design to fit around other handle bar items
• The Tech 3 lever is directly compatible with Shimano I-Spec shifters.

$250.50
• Rigid CNC'd one piece caliper
• E4 caliper uses 4x16mm phenolic pistons to give more usable power
• Tech 3 lever offers 5% more power compared to our previous lever
• Ergonomic lever design to fit around other handle bar items
• The Tech 3 lever is directly compatible with Shimano I-Spec shifters.

$42.48
Hope Direct Shifter mounts allow shifter pods to mount directly to the Tech lever clamp, freeing up handlebar space and improving ergonomics.
• Sold in pairs
• Contains two shifter mounting bolts and four lever clamp bolts
• SRAM mount allows use of X9, X0 and XX shifter bodies

$23.38
· CNC machined in Barnoldswick, England
· Includes mounting bolts
· Not compatible with Hope Mono6 or Moto Brakes

$217.10
• Rigid CNC'd one piece caliper
• Increased piston diameter
• Tech 3 lever offers 5% more power compared to our previous lever
• Ergonomic design to fit around other handle bar items
• The Tech 3 lever is directly compatible with Shimano I-Spec shifters

$1.90
Hope Disc Brake Hose Small Parts
· This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder

$55.93
Hope Brake Line kits
• Works for front or rear
• Made for Hope by Goodridge
• Fits most manufacturer's disc brakes
• Braided stainless steel line
• Hose length: 1600mm
• Hose OD: 6mm
• Hose ID: 2.4mm

$23.38
· CNC machined in Barnoldswick, England
· Includes mounting bolts
· Not compatible with Hope Mono6 or Moto Brakes

$285.00
• On the fly Bite Point Control and Reach adjustment
• Direct compatibility with Shimano I-Spec shifter
• Direct mount available for SRAM shifters
• New piston dust cover design
• New reservoir diaphragm design
• CNC machine in Barnoldswick, England
• 2014 T6 aluminum alloy
• Wide angle hose connector mount
• Floating or vented rotor compatible
• Goodridge braided hose
Page 1 of 1