Parts & Accessories

Parts for servicing Zipp hubs.

• Zipp, 11.1918.025.000, Freehub body seal and spacer, 30/60
• SRAM Model ID: HU-SPP-A0

Package comes with two pieces of rim tape for use with the Zipp clinchers. Woven nylon material. Tape is extra thin with a thickness of 0.5 mm. Note: For Zipp 700c and 650c aluminum/carbon hybrid clichers, use the 16 mm rim tape. For Zipp 30 wheel set use 18mm but for the wider Firecrest and Firestrike carbon clinchers use the 20mm x 1/2mm rim tape.

Parts for servicing Zipp hubs.

• WHEEL SPRING AND PAWL SET FOR ZIPP 177 REAR HUB QTY 4
• SRAM Model ID: HU-SPP-A0

Parts for servicing Zipp hubs.

• Shim for 177 Freehub body Qty 1
• SRAM Model ID: HU-SPP-A0

Parts for servicing Zipp hubs.

• Wheel Seal And Shim Freehub Body Zipp 177 Qty 1
• SRAM Model ID: HU-SPP-A0

Zipp Front Hub Conversion Caps

• Wheel Axle End Cap Zipp 76/77 Front Quick Release
• SRAM Model ID: HU-SPP-A0

Parts for servicing Zipp hubs.

• Zipp, 0,025 Spacer for 188 hub, To fit Campy 11sp, 11.1915.038.000
• SRAM Model ID: HU-SPP-A0

Zipp Front Hub Conversion Caps

• Wheel Axle End Cap Set Front Zipp 76/176
• SRAM Model ID: HU-SPP-A0

Wheel Conversion Caps for Zipp 77/177 Disc hubs. Converts your Zipp 77 or 177 hubs to nearly any frame standard.

Parts for servicing Zipp hubs.

• WHEEL WAVE SPRING ZIPP COGNITION NSW AXLE
• SRAM Model ID: HU-SPP-A0

Parts for servicing Zipp hubs.

• WHEEL MAGNET KIT INNER AND OUTER FOR REAR ZIPP COGNITION NSW
• SRAM Model ID: HU-SPP-A0

Zipp Spoke Nipple Washers

• Zipp, Nipple Washers Oval for Firecrest Wheels, Bag of 50, 11.1915.026.020
• SRAM Model ID: WH-SPP-A0

Zipp Rear Axle Conversion Kits

• Wheel Axle End Cap Rear 11 Speed QR
• SRAM Model ID: HU-SPP-A0

Includes rim strip and tubeless tape for 1 wheel.

Rear Wheel Axle for X0 hubs, including the following wheels: Rise 60 (B1), Roam 30, Roam 40, Rail 40, Rise XX, Roam 50, 60 B1 Compatible with part numbers: HU-X0-A1, WH-RAIL-40-A1, WH-RISE-60-B1, WH-RISE-XX-A1, WH-ROAM-30-A1, WH-ROAM-40-A1, WH-ROAM-50-A1, WH-ROAM-50-B1, WH-ROAM-60-B1

Replacement rear axles for Zipp hubs.

• WHEEL AXLE REAR ZIPP 176/177 RIM BRAKE (AXLE ONLY)
• SRAM Model ID: HU-SPP-A0

Zipp Rear Axle Conversion Kits

• Wheel Axle End Cap Set Front Zipp 76/176
• SRAM Model ID: HU-SPP-A0

Zipp Rear Axle Conversion Kits

• WHEEL AXLE END CAP ASSEMBLY DRIVE SIDE REAR ZIPP COGNITION NSW SRAM
• SRAM Model ID: HU-SPP-A0

Zipp Front Hub Conversion Caps

• WHEEL AXLE END CAP SET FRONT - 15X110 BOOST - ZM2 HUBS
• SRAM Model ID: HU-SPP-A0

Zipp Front Hub Conversion Caps

• WHEEL AXLE END CAP SET FRONT - 15X110 BOOST - TORQUE CAP ROCKSHOX FORKS - ZM2 HUBS
• SRAM Model ID: HU-SPP-A0

Zipp Front Hub Conversion Caps

• End caps for Zipp Cognition disc brake hubs
• SRAM Model ID: HU-SPP-A0

Parts for servicing Zipp hubs.

• SPRING AND PAWL SET (INCLUDES 6 COIL SPRING, 6 PAWLS, DRIVER BODY SEAL AND A ROUND WIRE SNAP RING) FOR ZIPP ZR1 HUBS
• SRAM Model ID: HU-SPP-A0

Parts for servicing Zipp hubs.

• Zipp, 88/188 Clinch nut and screw, 88, no thread, 11.2018.000.000
• SRAM Model ID: HU-SPP-A0

Zipp Rear Axle Conversion Kits

• End caps for Zipp Cognition disc brake hubs
• SRAM Model ID: HU-SPP-A0

- Hub axle end cap set, rear - Zipp Cognition V2 Disc Brake - Rim brake compatible with XDR & 11-speed

- Hub axle end cap set, rear - Zipp Cognition V2 Rim Brake - Quick release

Zipp Rear Axle Conversion Kits

• WHEEL AXLE END CAP SET REAR - 12X148 - XD AND 10/11SPD - ZM2 HUBS
• SRAM Model ID: HU-SPP-A0

Match your Beyond Black hubs, spokes and decals (each sold separately) with skewers from Zipp. - Sold in pairs - Stainless steel: 85 grams/set - Titanium: 78 grams/set

Replacement rear axles for Zipp hubs.

• Zipp, 188v8, 11sp rear hub axle, 11.1918.010.000
• SRAM Model ID: HU-SPP-A0

- Wheel bearing kit front/rear - Bearing dimensions: 17 x 30 x 7mm - Material: steel - 2 pieces

Zipp Cartridge Bearings

• Wheel Bearing Kit Front Zipp 76/77/Cognition Nsw 61803 Qty 2
• SRAM Model ID: HU-SPP-A0

- Holds one wheel securely for transport (up to 700c with 35mm CX tire installed). - Connects to second Zipp Connect wheel bag to transform into a double wheel bag. - Sturdy water-resistant EVA construction. - Includes removable axle/QR pocket.

Wheel Freehub Kit—XD Driver Body Kit—Zipp ZM2 - Compatible With: WH-MOTO-30-B1

Zipp Freehub Bodies

• Freehub kit for Zipp 176/177 hubs
• SRAM Model ID: HU-SPP-A0

Freehub bodies for Zipp Cognition hubs.

• Freehub for Cognition V2 hubs
• SRAM Model ID: HU-SPP-A0

- Freehub for Cognition V2 hubs

Wheel Freehub Kit—(Includes Bearings & Pawls) 11/12 Speed XD—X0 HUBS/RISE 60 (B1)/ROAM 30/ROAM 40/RAIL 40/RISE XX/ROAM 50/60 (B1) Compatible With: HU-X0-A1, WH-RAIL-40-A1, WH-RISE-60-B1, WH-RISE-XX-A1, WH-ROAM-30-A1, WH-ROAM-40-A1, WH-ROAM-50-A1, WH-ROAM-50-B1, WH-ROAM-60-B1

Wheel Freehub Kit SS 176/177 SRAM XDR - End Caps Not Included Compatible With: WH-202-CCR-A1, WH-202-TLD-A1, WH-202-TUD-A1, WH-302-CCD-A1, WH-302-CCR-A1, WH-302-TLR-A1, WH-303-CCR-B1, WH-303-TLD-A1, WH-303-TUD-B1, WH-303-TUR-B1, WH-30C-CLD-A1, WH-30C-CLR-A1, WH-404-CCR-A1, WH-404-CCR-B1, WH-404-TLD-A1, WH-808-CCR-B1, WH-808-TLD-A1, WH-SP9-CC30-A1, WH-SP9-CCD-A1, WH-SP9-CCR-A1, WH-SP9-TUD-A1

Freehub bodies for Zipp Cognition hubs.

Replacement rear axles for Zipp hubs.

• WHEEL AXLE REAR ZIPP COGNITION NSW WITH BEARINGS
• SRAM Model ID: HU-SPP-A0

This 11-speed freehub is only compatible with model-year 2013 (V8) and 2014 (V9) Zipp wheelsets. Check that your hub has a black end cap before using this freehub. Use the spacer for compatibility with 10-speed Shimano and SRAM drivetrains after installation. The red freehub is designed for SRAM or Shimano drivetrains and includes a spacer for 10-speed compatibility. The blue freehub is designed for Campagnolo drivetrains. The Campagnolo version requires one 0.25mm axle washer, which is included. - 10 to 11-speed wheel conversion can only be completed by an authorized Zipp Service Center - Not intended to convert older 10-speed freehub wheels to 11-speed freehub wheels - Only intended to swap freehub compatibility (SRAM/Shimano - Campagnolo) with current 11-speed wheels - Includes cassette spacer - Material: Aluminum

Wheel Freehub Kit SRAM XDR for Super 9RB - Compatible only with the Super 9 - Compatible With: WH-SP9-CCR-A1

Zipp Speed Weaponry Rear Axle Conversion Kit - Not to be used on 188 V6 or earlier rear hubs - Only to be used to convert Zipp's 188 V7 10-speed rear hubs to 11-speed

Parts for servicing Zipp hubs.

• WHEEL CLUTCH ASSEMBLY AND SEAL FOR REAR ZIPP COGNITION NSW DISC BRAKE / RIM BRAKE GENERATION 2
• SRAM Model ID: HU-SPP-A0

Parts for servicing Zipp hubs.

• WHEEL CLUTCH ASSEMBLY AND SEAL FOR REAR ZIPP COGNITION NSW
• SRAM Model ID: HU-SPP-A0

These Presta valve stems are compatible with tubeless rims and tires for road, gravel, mountain, and fat bike wheels. The kit includes two Presta valve stems, two machined aluminum caps, two nuts, two extra valve cores, a unique machined aluminum valve core remover, and three rubber base options for compatibility with more rim internal shapes. - 44mm and 60mm stem length options - Slotted stem base for compatibility with tire inserts - Oversized stem nut for better sealing and easier removal - Stem threaded below rubber seal for better performance on single wall rims - Three rubber bases included: two types of cones (one installed), one channel - Replacement parts available via Wolf Tooth Right To Repair, including cap kit with two caps, nut kit with two nuts, and valve cores

The Wolf Tooth Rear Axle uses a captive steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. - Made in Minnesota to aerospace standards

The Wolf Tooth Rear Axle uses a captive steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. - Made in Minnesota to aerospace standards

The Wolf Tooth Rear Axle uses a captive steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. - Made in Minnesota to aerospace standards

The Wolf Tooth Rear Axle does more than secure wheels When developing the Rear Axle, Wolf Tooth engineers knew that they wouldn't be able to get away with any old factory replacement part, even if it was made in Minnesota to aerospace standards. The Wolf Tooth Rear Axle uses a captive steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to the clamping load for a stiffer interface, and prevents the axle from sticking or galling when you want to remove it. These are also great replacement options for lost or damaged stock axles. Always apply a small amount of grease to the washer and threads when installing. Check out the Axle Caps for added protection and the Trainer Caps for those days on the trainer.

- Colored rim decal kits to personalize your ride - Decals to fit 2 100w 26-inch rims

- Colored rim decal kits to personalize your ride - Decals to fit two (2) 50w 27.5+ rims

- Colored rim decal kits to personalize your ride - Decals to fit two (2) 70w 26-inch rims

Ultra-light, bolt-on thru-axles, with a low-profile 6mm head for use on Whisky forks and others. They are also available in some common rear frame sizes. See manufacturer's specifications for fitment questions. - Thread Length: 12mm

Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - 22mm metal dust seal is pressed on cone - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Cone Diameter: 15.0mm - Dust Seal Diameter: 22mm - Length: 11.4mm - 1 cone per bag COMPATIBLE HUBS: - Shimano Nexave HB-T400 Front - Shimano Deore HB-M510 Front - STX HB-MC32/30 Front - STX Parallax Front

Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Shimano / Japanese rear hubs with 130mm spacing - Type: Hollow Axle - Threads: 10mm x 1 - Diameter: 10mm - Length: 141mm - 1 axle per bag

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Shimano / Japanese rear hubs with 135mm spacing - Type: Hollow Axle - Threads: 10mm x 1 - Diameter: 10mm - Length: 146mm - 1 axle per bag

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Shimano / Japanese rear hubs - Type: Solid Axle - Threads: 10mm x 1 - Diameter: 10mm - Length: 174mm - 1 axle per bag