Bikes

Blackthorn C XTR comes equipped for challenging all-mountain terrain. The carbon fiber frame lends the stiffness you need to hold your line. The 140 mm Fox Float X Factory shock and 160 mm Fox Float 36 Factory GRIP2 fork ensure that you can handle just about any feature that's waiting around the next berm. Progressive geometry and our Split Pivot suspension design keep things composed on wicked descents and put you in a position to overcome tough climbs. Our pack-free riding features include a padded tube strap spot, top tube mount, and bottle mount for a lighter load on your back. Shimano's gold-standard XTR 1 x 12 groupset and four-piston brakes make speed modulation as smooth as it gets. All told, we think it's the best all-mountain bike out there—we invite you to see for yourself. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. PURPOSE-TUNED SUSPENSION The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. PROGRESSIVE GEOMETRY Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. FLIP CHIP 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS CARBON MAIN TRIANGLE WITH CARBON SEATSTAYS AND ALUMINUM CHAINSTAYS EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. TOP TUBE ACCESSORY MOUNTS Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. DOWN TUBE THREE-PACK MOUNTS Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. INTEGRATED REPAIR KIT LOCATION Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) ACCOMMODATES A 26 OZ BOTTLE All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. INTERNAL SLEEVED CABLE ROUTING Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. MOLDED FRAME PROTECTION Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry. CHAIN GUIDE-COMPATIBLE Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). STEALTH DROPPER POST ROUTING Compatible with 30.9mm dropper posts for true trail bike performance.

2,700 miles. 200,000 feet of climbing. Smooth gravel, rough forest roads, and singletrack all in the same day for weeks on end. This is the Tour Divide, and Cutthroat C X01 Eagle AXS is engineered to thrive on it. The lightweight carbon frameset is stiff where it matters for power transfer and our Class 5 VRS provides compliance where comfort is the priority. Our drop-bar mountain bike geometry puts you in position to conquer all-day efforts on nearly any surface. Cutthroat comes with a variety of mounts for water and gear to help you haul everything you'll need until the next opportunity for resupply. Rounding out the package is SRAM's X01 Eagle AXS Eagle electronic drivetrain, an unparalleled riding experience with a gear range to get you over any mountain pass.

Warbird C Force eTap AXS Wide is a high-tech gravel race rig. The carbon frame features our Class 5 VRS, cutting down on the harsh bumps that take a toll on your body. Warbird's geometry emphasizes stability and comfort, for a smooth ride feel you'll be thankful for on long days in challenging conditions. Plentiful frame and fork mounts mean you can bring everything from extra bottles to a bikepacking kit on your rides. SRAM's Force eTap AXS Wide group is a wide-range 2 x 12 system with the ease of wireless electronic shifting. Saddle up and chase podiums on the best gravel race bike we've ever made.

It would be nice if every road ride was on brand-new blacktop, but for real-world road riding, there's Warroad C Ultegra Di2. When your route inevitably turns to rubble, the 700c x 32 mm wheels and tires maintain momentum while providing traction and a supple ride. Our Class 5 VRS adds some compliance to the rear end for all-day comfort in the saddle. Dual wheel size compatibility gives you the option of 700c or 650b as terrain and preferences change, making this one of the best adventure road bikes for rides that cover a variety of terrain. Shimano's Ultegra Di2 group offers smooth shifting and proven performance so you can focus on enjoying every mile.

Beargrease is our fat tire bike built to go faster than you knew fat tire bikes could go. The super-light frame and fork and the sure-footed rollover of 27.5 x 4.0" wheels and tires cover challenging terrain quickly. Versatile frame and fork mounts let you carry everything you need for the backcountry. Test yourself in a snowy endurance race or pack your camping gear and embark on a long-distance overnight bike trip.

Warbird is Salsa's gravel race bike, built on years of experience racing in some of the nation's premier gravel events. Its carbon fiber frameset, our carefully-honed gravel race geometry, and plentiful mounts for water, tools, and accessories make Warbird a top contender in the gravel bike world. - High-modulus carbon frame with rear thru-axle dropouts and rear rack compatibility via Rack-Lock seat collar (sold separately) - Class 5 Vibration Reduction System (VRS) reduces fatigue caused by micro-impacts - Waxwing Deluxe carbon fork features a 12 x 100 mm thru-axle, Three-Pack and fender mounts, mid-blade eyelets, dynamo cable routing, and flat-mount brake standard - Compatible with 700c (45 mm maximum) and 650b (51 mm maximum) wheels and tires - Compatible with 1x, 2x, and electronic drivetrains - Internal sleeved cable routing, dropper post-compatible - Three water bottle mounts in the main triangle on 56–61 cm frames; two on 49–54.5 cm frames - Top tube mount for Salsa EXP Series Direct Mount Top Tube Bag and additional mount on underside of down tube - Accommodates a 40mm travel suspension fork and dropper post with internal routing (on 1x drivetrains only)

Warbird is Salsa's gravel race bike, built on years of experience racing in some of the nation's premier gravel events. Its carbon fiber frameset, our carefully-honed gravel race geometry, and plentiful mounts for water, tools, and accessories make Warbird a top contender in the gravel bike world.

Cassidy C XT is a well-balanced carbon enduro bike. The stiff frame helps you hold your line through treacherous terrain, while Fox's Float X2 Performance shock and Float 38 Performance Elite GRIP2 soften the trail with 165 mm rear and 180 mm front travel. Progressive trail geometry and our Split Pivot suspension design keep your tires planted both down and up the mountain. On-bike cargo features such as a padded tube strap spot, top tube mount, and full-size bottle clearance support extra laps or longer days out, making Cassidy ideal for enduro adventures. Shimano's XT 1 x 12 components bring smooth shifting, wide range, and four-piston brakes to take it all to the next level. Time to start adding trails to your "must-ride" list. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. Flip Chip 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry.

Horsethief is one bike for many trails. From finessing local loops to savoring new destinations, Horsethief has your back. It's capable of pushing through technical terrain, instills confidence while riding aggressively, and pairs well with beautiful vistas and a post-ride beverage. - Wheel Size: 29", 27.5+ - Front Axle: 15mm Thru x 110mm - Brake Type: Disc - Fork Type: Suspension - Frame Material: Carbon - TT (Effective): 615 - Rear Axle: 12mm Thru x 157mm - Frame Type: Suspension - Carbon frame and seat stays featuring the Split Pivot suspension design with 120mm of efficient travel, remaining fully active under braking while supportive throughout its travel, paired with a 140mm suspension fork - A short stem paired with a long top tube, combined with a 67-degree head tube angle provides descending confidence, yet balances overall wheelbase length and slow speed maneuverability - Every size fits two full-size bottles in the triangle; Anything Bracket and top tube mounts boost cargo space for pack-free riding bliss - Super Boost 157 x 12mm rear hub spacing combined with a standard width bottom bracket results in a 432mm chainstay length that's 5mm shorter than previous-generations - Rear flip chip adjusts head tube angle and bottom bracket height for terrain, wheel size, and personal preference - Spec'd with a 29 x 2.5" front and 2.4" rear wheel/tire combination, but can accommodate a range of additional sizes of 27.5 x 2.8 - 3.0" and 29 x 2.2 - 2.6"

Rustler C XT puts fun first. The lightweight carbon frame, responsive geometry, and 27.5" wheel size keep it nimble for hitting all of your favorite trail features. Split Pivot suspension design means 130 mm of supple yet progressively supportive rear travel that's active enough to provide traction when accelerating, braking, and climbing. Shimano's XT component set is revered around the world and better now than ever, with wide-range 12-speed components for smooth shifting and four-piston brakes to slow you down when necessary. With room for a full-size bottle and a top tube mount for accessories, Rustler might be the best carbon trail bike for a phenomenal day in the woods. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. ON-BIKE STORAGE: Salsa innovated new bottle and accessory mount placements for added utility and ride range. Our gravel and road bikes have mounts on the top tube and underside of the down tube, plus up to five additional bottle mounts for extra hydration, ride accessories, and bikepacking gear. Our mountain bike line features top tube mounts, mounts on the underside of the down tube on hardtail models, and space for multiple bottles on hardtails and select suspension bikes. FRAME PROTECTION: We use various materials to protect our frames and forks from damage, whether it’s a rock strike on the trail or thick, abrasive mud on your favorite gravel route.

For an all-mountain bike with an adventurous side, Blackthorn C XT is the ticket. We designed the stiff carbon fiber frame around progressive geometry that feels planted on descents and climbs. We paired Blackthorn XT's 160 mm Fox Float 36 Performance Elite GRIP2 fork with a 140 mm Fox Float X Performance Elite shock that runs on our Split Pivot suspension platform for excellent small-bump compliance and support. A padded tube strap spot, top tube mount, and bottle mount allow for pack-free riding or extending your range. The Shimano XT 1 x 12 drivetrain and four-piston brakes keep you in control through testing terrain. Blackthorn C XT is a brilliant all-mountain bike equipped for a wide variety of singletrack adventures. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. PURPOSE-TUNED SUSPENSION The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. PROGRESSIVE GEOMETRY Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. FLIP CHIP 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS CARBON MAIN TRIANGLE WITH CARBON SEATSTAYS AND ALUMINUM CHAINSTAYS EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. TOP TUBE ACCESSORY MOUNTS Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. DOWN TUBE THREE-PACK MOUNTS Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. INTEGRATED REPAIR KIT LOCATION Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) ACCOMMODATES A 26 OZ BOTTLE All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. INTERNAL SLEEVED CABLE ROUTING Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. MOLDED FRAME PROTECTION Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry. CHAIN GUIDE-COMPATIBLE Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). STEALTH DROPPER POST ROUTING Compatible with 30.9mm dropper posts for true trail bike performance.

We designed Spearfish C XT to be the endurance XC bike of your dreams. Its carbon frame wastes no watts and its progressive XC geometry puts you in position to rail descents and sprint up climbs, making it a fun ride even off the racecourse. The Split Pivot suspension design delivers efficient pedaling, predictable braking, and excellent traction, backed by a Fox Float DPS Performance Elite shock with 100 mm of travel and a RockShox SID Ultimate fork good for 120 mm. Spearfish's on-bike cargo features make long days out easier, and the Shimano XT 1 x 12 componentry is a high-performance group that delivers precise shifts mile after mile.

Moraine is Salsa's light electric mountain bike. It adds range, route options, and capability to every trail ride with a Fazua Ride 60 drive system and 145 mm of Split Pivot suspension. Moraine's geometry feels right at home on backcountry lines and buffed-out flow trails. Add Salsa’s on-bike cargo features, and Moraine makes riding to the trailhead, sessioning lines, and taking second laps feel like second nature. - 145mm of Split Pivot suspension to maximize traction and efficiency - Split Pivot + frame design philosophy allows riders to swap between travel classes - Fazua Ride 60 class 1 mid-drive motor (20 mph/32 kph max assist) - 60Nm max torque - Compatible with 210 Wh Fazua Energy range-extender battery (sold separately) - Internal cable and hose routing - 12 x 148mm Boost rear spacing - SRAM UDH compatible - Accommodates up to 29 x 2.6” or 27.5 x 2.8” tires - Integrated tool and tube strap location in front triangle - Pump mount location - All sizes fit one bottle or Fazua Energy range-extender battery - Frame protection on downtube, main pivot, seatstay, and chainstay

Notch is Salsa's high-torque electric mountain bike. In 160 mm-travel mode, It’s a balanced platform built for roaming far on rowdy terrain. With geometry poised for stability at speed, a powerful Bosch Performance Line CX motor, efficient Split Pivot suspension, and on-bike storage, Notch is happiest when it’s putting in extra laps, exploring new trail systems, or battling between the tape in an enduro event. - 6061-T6 alloy frame with high-modulus carbon fiber control link - Split Pivot suspension design with 160 mm of efficient travel - Split Pivot+ frame design allows riders to swap between travel classes - Bosch Performance Line CX class 1 mid-drive motor with smart system (20 mph/32 kph max assist) - 85 Nm max torque - 500 Wh Bosch PowerTube battery fully enclosed in downtube? - Compatible with 250 Wh Bosch PowerPack range-extender battery ?(sold separately) - 29 x 2.6” tire clearance - Tool and tube mount on underside of top tube - All sizes fit one bottle or Bosch PowerPack range-extender battery - Frame protection in high-wear areas (downtube, main pivot, seatstay, and chainstay)

"Fast" and "fat bike" may seem mutually exclusive until you've ridden Beargrease. Its 27.5 x 4.0" wheel and tire combo offer better rollover than your standard fat bike, and Beargrease's carbon fiber frameset is lightweight yet stiff for excellent power transfer. But, being svelte doesn't mean sacrificing utility—ample cargo-mounting points make this the best fat bike for light-and-speedy adventures. SRAM's X01 Eagle 1 x 12 drivetrain provides fast and light shifting action with a gear range for tackling any trail obstacle. High-Modulus Carbon Fiber Frame This material offers improved stiffness, better vibration damping, excellent durability, and weight savings compared to other frame materials. Beargrease Geometry 440mm chainstays, longer front/center, short stems, and wide bars create room to move and add confidence while maneuvering on tight trails. Standover height is improved, allowing the addition of an X-Small frame size. This geometry results in a fat bike that rides like a trail bike. It is stable, steers well in loose conditions, and still remains nimble and agile despite the massive wheels and tires. A low bottom bracket height is also key, keeping the rider's center of gravity low, and making dabbing, dismounting, and remounting easier. 27.5 x 4.0" Wheel & Tire Size Beargrease rolls on 27.5 x 3.8" wheels and tires. For groomed snow or dirt, the increase in diameter provides increased rollover, a longer contact patch, and the flotation of a 4.0" tire without added rolling resistance. Kingpin Deluxe Fork Featuring a full carbon design, the Kingpin Deluxe Fork is lightweight and durable, and features an amazing array of accessory bosses to help you make the most of your Beargrease fat bike: - Dual sets of Three-Pack bosses on each leg accept bottle cages or our Anything Cage accessory - Lowrider mounts work with our Down Under front rack for a traditional touring setup - Internal dynamo hub wire routing keeps the front end clean for those upgrading to dyno hubs - 150 x 15mm thru-axle design boosts stiffness and aids in solid tracking on the trail

Tributary is Salsa's electric rugged-road adventure bike. It's built to devour big, burly dirt routes. Tributary's well-balanced gravel geometry, massive tire clearance, and suspension fork mean total comfort and control on sketchy surfaces — even at ebike speeds. The BOSCH Performance Line Speed motor empowers riders to tackle demanding bikepacking routes, explore vast networks of forest roads, or add miles to any adventure. Pair all that with Salsa's on-bike cargo features, and Tributary is ready to take riders from their front door to far-out. - 6061-T6 aluminum frame - Boost suspension fork - BOSCH Performance Line Speed class 3 mid-drive motor with smart system - 28 mph or 45 km/h max assist - 85 Nm max torque - 625 watt-hour (Wh) Bosch PowerTube internal battery - Compatible with Bosch range extender battery (sold separately) - Class 5™ VRS - Internal dropper post-routing - Internal cable routing with port for integrated lighting system - 148 x 12 Boost thru-axle rear - SRAM UDH compatible - Fender mounts and rear rack mounts - Compatible with direct-mount frame bags - Two bottle mounts inside main triangle on all sizes - Accommodates up to 29 x 2.8" front, 2.6" rear tires

Tributary is Salsa's electric rugged-road adventure bike. It's built to devour big, burly dirt routes. Tributary's well-balanced gravel geometry, massive tire clearance, and suspension fork mean total comfort and control on sketchy surfaces — even at ebike speeds. The BOSCH Performance Line Speed motor empowers riders to tackle demanding bikepacking routes, explore vast networks of forest roads, or add miles to any adventure. Pair all that with Salsa's on-bike cargo features, and Tributary is ready to take riders from their front door to far-out. - 6061-T6 aluminum frame - Boost suspension fork - BOSCH Performance Line Speed class 3 mid-drive motor with smart system - 28 mph or 45 km/h max assist - 85 Nm max torque - 625 watt-hour (Wh) Bosch PowerTube internal battery - Compatible with Bosch range extender battery (sold separately) - Class 5™ VRS - Internal dropper post-routing - Internal cable routing with port for integrated lighting system - 148 x 12 Boost thru-axle rear - SRAM UDH compatible - Fender mounts and rear rack mounts - Compatible with direct-mount frame bags - Two bottle mounts inside main triangle on all sizes - Accommodates up to 29 x 2.8" front, 2.6" rear tires

Rustler Carbon XT will inspire you to get creative with your trail riding. With 150mm front and 130mm rear suspension travel, playful geometry, and 27.5-inch wheels, you’ll see rocks and roots as playthings rather than obstacles. With a lightweight carbon frame and the pedaling efficiency of the Split Pivot rear suspension system, Rustler can hustle up the trail just as well as it flows down. Shimano’s XT drivetrain makes shifting second nature, while the four-piston brakes bring everything to a halt when summoned. Rediscover your favorite trails with Rustler Carbon XT.

Cutthroat C GX Eagle AXS is an ultra-endurance bikepacking machine inspired by the unique challenges that the Tour Divide presents. Its lineage led us to a drop-bar mountain bike geometry that provides confidence even in the most challenging riding conditions. Cutthroat's carbon frame delivers excellent power transfer and the Class 5 VRS rear end soaks up micro-impacts from the road and trail, preserving your stamina. Ample cargo mounts allow you to configure your load to suit your personal preferences. SRAM's GX Eagle AXS groupset is a reliable workhorse—perfect for Tour Divide bikes and rigs that will spend a lot of time deep in the backcountry.

Moraine is Salsa's light electric mountain bike. It adds range, route options, and capability to every trail ride with a Fazua Ride 60 drive system and 145 mm of Split Pivot suspension. Moraine's geometry feels right at home on backcountry lines and buffed-out flow trails. Add Salsa’s on-bike cargo features, and Moraine makes riding to the trailhead, sessioning lines, and taking second laps feel like second nature. - 145mm of Split Pivot suspension to maximize traction and efficiency - Split Pivot + frame design philosophy allows riders to swap between travel classes - Fazua Ride 60 class 1 mid-drive motor (20 mph/32 kph max assist) - 60Nm max torque - Compatible with 210 Wh Fazua Energy range-extender battery (sold separately) - Internal cable and hose routing - 12 x 148mm Boost rear spacing - SRAM UDH compatible - Accommodates up to 29 x 2.6” or 27.5 x 2.8” tires - Integrated tool and tube strap location in front triangle - Pump mount location - All sizes fit one bottle or Fazua Energy range-extender battery - Frame protection on downtube, main pivot, seatstay, and chainstay

Notch is Salsa's high-torque electric mountain bike. In 160 mm-travel mode, It’s a balanced platform built for roaming far on rowdy terrain. With geometry poised for stability at speed, a powerful Bosch Performance Line CX motor, efficient Split Pivot suspension, and on-bike storage, Notch is happiest when it’s putting in extra laps, exploring new trail systems, or battling between the tape in an enduro event. - 6061-T6 alloy frame with high-modulus carbon fiber control link - Split Pivot suspension design with 160 mm of efficient travel - Split Pivot+ frame design allows riders to swap between travel classes - Bosch Performance Line CX class 1 mid-drive motor with smart system (20 mph/32 kph max assist) - 85 Nm max torque - 500 Wh Bosch PowerTube battery fully enclosed in downtube? - Compatible with 250 Wh Bosch PowerPack range-extender battery ?(sold separately) - 29 x 2.6” tire clearance - Tool and tube mount on underside of top tube - All sizes fit one bottle or Bosch PowerPack range-extender battery - Frame protection in high-wear areas (downtube, main pivot, seatstay, and chainstay)

Tributary is Salsa's electric rugged-road adventure bike. It's built to devour big, burly dirt routes. Tributary's well-balanced gravel geometry and massive tire clearance mean total comfort and control on sketchy surfaces — even at ebike speeds. The BOSCH Performance Line Speed motor empowers riders to tackle demanding bikepacking routes, explore vast networks of forest roads, or add miles to any adventure. Pair all that with Salsa's on-bike cargo features, and Tributary is ready to take riders from their front door to far out. - 6061-T6 aluminum frame - Tributary Carbon fork - BOSCH Performance Line Speed class 3 mid-drive motor with smart system - 28 mph or 45 km/h max assist - 85 Nm max torque - 625 watt-hour (Wh) Bosch PowerTube internal battery - Compatible with Bosch range extender battery (sold separately) - Class 5™ VRS - Internal dropper post routing - Internal cable routing with port for integrated lighting system - 148 x 12 Boost thru-axle rear - SRAM UDH compatible - Fender, rack, and three pack-mounts - Compatible with direct-mount frame bags - Two bottle mounts inside main triangle on all sizes - Accommodates up to 29 x 3.0" front, 2.6" rear tires - Abrasion-resistant wear protection plates on inside of fork legs

Tributary is Salsa's electric rugged-road adventure bike. It's built to devour big, burly dirt routes. Tributary's well-balanced gravel geometry and massive tire clearance mean total comfort and control on sketchy surfaces — even at ebike speeds. The BOSCH Performance Line Speed motor empowers riders to tackle demanding bikepacking routes, explore vast networks of forest roads, or add miles to any adventure. Pair all that with Salsa's on-bike cargo features, and Tributary is ready to take riders from their front door to far out. - 6061-T6 aluminum frame - Tributary Carbon fork - BOSCH Performance Line Speed class 3 mid-drive motor with smart system - 28 mph or 45 km/h max assist - 85 Nm max torque - 625 watt-hour (Wh) Bosch PowerTube internal battery - Compatible with Bosch range extender battery (sold separately) - Class 5™ VRS - Internal dropper post routing - Internal cable routing with port for integrated lighting system - 148 x 12 Boost thru-axle rear - SRAM UDH compatible - Fender, rack, and three pack-mounts - Compatible with direct-mount frame bags - Two bottle mounts inside main triangle on all sizes - Accommodates up to 29 x 3.0" front, 2.6" rear tires - Abrasion-resistant wear protection plates on inside of fork legs

Warbird C Rival XPLR eTap AXS is built to tame the toughest terrain, with a Class 5 VRS-equipped high-modulus carbon fiber frameset. Our gravel race geometry puts you in a comfortable, confident riding position. On-bike cargo features let you gear up for long days of riding far from anywhere. SRAM's sure-shifting Rival XPLR eTap AXS drivetrain is a technological marvel with loads of gear range. As the industry's first gravel race bike, Warbird is designed and built to provide control, comfort, and speed when the going gets rough.

Warroad C Rival eTap AXS is the cure for the common road bike. The stiff, lightweight carbon frameset with Class 5 VRS and our endurance road geometry blends performance for spirited riding with comfort for long days in the saddle on any road surface — it's our best bike for gravel and road riding. Extra mounts on the frame and fork hold everything you need for long days out. Dual wheel size compatibility lets you run up to 700c x 35 mm or 650b x 47 mm wheels and tires, and SRAM's Rival eTap AXS drivetrain feels superb and performs flawlessly, no matter where your wanderings take you.

Horsethief is one bike for many trails. From finessing local loops to savoring new destinations, Horsethief has your back. It’s capable of pushing through technical terrain, instills confidence while riding aggressively, and pairs well with beautiful vistas and a post-ride beverage. - Wheel Size: 29", 27.5+ - Front Axle: 15mm Thru x 110mm - Brake Type: Disc - Fork Type: Suspension - Frame Material: Carbon - TT (Effective): 593 - Rear Axle: 12mm Thru x 157mm - Frame Type: Suspension - Carbon frame and seat stays featuring the Split Pivot suspension design with 120mm of efficient travel, remaining fully active under braking while supportive throughout its travel, paired with a 140mm suspension fork - A short stem paired with a long top tube, combined with a 67-degree head tube angle provides descending confidence, yet balances overall wheelbase length and slow speed maneuverability - Every size fits two full-size bottles in the triangle; Anything Bracket and top tube mounts boost cargo space for pack-free riding bliss - Super Boost 157 x 12mm rear hub spacing combined with a standard width bottom bracket results in a 432mm chainstay length that’s 5mm shorter than previous-generations - Rear flip chip adjusts head tube angle and bottom bracket height for terrain, wheel size, and personal preference - Spec’d with a 29 x 2.5" front and 2.4" rear wheel/tire combination, but can accommodate a range of additional sizes of 27.5 x 2.8 - 3.0" and 29 x 2.2 - 2.6"

Warbird is Salsa's gravel race bike, built on years of experience racing in some of the nation's premier gravel events. Its carbon fiber frameset, our carefully-honed gravel race geometry, and plentiful mounts for water, tools, and accessories make Warbird a top contender in the gravel bike world. - High-modulus carbon frame with rear thru-axle dropouts and rear rack compatibility via Rack-Lock seat collar (sold separately) - Class 5 Vibration Reduction System (VRS) reduces fatigue caused by micro-impacts - Waxwing Deluxe carbon fork features a 12 x 100 mm thru-axle, Three-Pack and fender mounts, mid-blade eyelets, dynamo cable routing, and flat-mount brake standard - Compatible with 700c (45 mm maximum) and 650b (51 mm maximum) wheels and tires - Compatible with 1x, 2x, and electronic drivetrains - Internal sleeved cable routing, dropper post-compatible - Three water bottle mounts in the main triangle on 56–61 cm frames; two on 49–54.5 cm frames - Top tube mount for Salsa EXP Series Direct Mount Top Tube Bag and additional mount on underside of down tube - Accommodates a 40mm travel suspension fork and dropper post with internal routing (on 1x drivetrains only)

Blackthorn C SLX stands out in the carbon all-mountain bike field for its capability and value. The progressive geometry feels planted on descents and steep climbs. A 160 mm Fox Float X Performance fork and 140 mm RockShox Lyrik Select+ RC shock with Split Pivot suspension design grants you the poise to plow through rock gardens, send drops, and hit doubles with confidence. Blackthorn brings you the benefits of pack-free riding, thanks to the integrated down tube strap, top tube mounts, and a bottle mount. Shimano's SLX 1 x 12 drivetrain and four-piston brakes are components you can rely on. We designed Blackthorn C SLX from the dirt up to lead the all-mountain category. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. PURPOSE-TUNED SUSPENSION The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. PROGRESSIVE GEOMETRY Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. FLIP CHIP 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS CARBON MAIN TRIANGLE WITH CARBON SEATSTAYS AND ALUMINUM CHAINSTAYS EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. TOP TUBE ACCESSORY MOUNTS Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. DOWN TUBE THREE-PACK MOUNTS Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. INTEGRATED REPAIR KIT LOCATION Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) ACCOMMODATES A 26 OZ BOTTLE All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. INTERNAL SLEEVED CABLE ROUTING Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. MOLDED FRAME PROTECTION Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry. CHAIN GUIDE-COMPATIBLE Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). STEALTH DROPPER POST ROUTING Compatible with 30.9mm dropper posts for true trail bike performance.

Blackthorn Carbon SLX is our 29er carbon all-mountain bike with the versatility to take on any trail. With progressive geometry, a lightweight carbon frame, 140mm of rear travel, and a 160mm fork, you're ready for jump lines, drops, rock gardens, and anything else the mountain can throw at you. Blackthorn's Split Pivot suspension system offers excellent pedaling efficiency and is fully active during braking, resulting in a well-balanced bike that both climbs and descends exceptionally well. Shimano's SLX drivetrain and four-piston brakes keep you in control when Blackthorn prompts you to push your limits.

Cassidy C SLX gives you confidence in your lines. The carbon frame tracks straight through rock gardens and over obstacles, supported by RockShox's Super Deluxe Select+ shock and ZEB Select+ RC fork—good for 165 mm rear and 180 mm front travel. The geometry is long, low, and slack enough to tame the steepest descents, but still lets you earn your turns on the climb back up. Our Split Pivot suspension design is compliant and efficient, promising predictable braking and excellent traction. On-bike cargo features include a padded tube strap spot, top tube mount, and full-size bottle clearance for longer rides and less weight in your pack (if you need one at all). The Shimano SLX 1 x 12 groupset is renowned for its reliable performance. Ready to rip? KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. Flip Chip 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry.

Spearfish C SLX is a carbon XC 29er that hits a sweet spot between race-day performance and weekday fun. The carbon frame keeps things light and stiff, while the progressive XC geometry makes descending a blast and climbing a breeze. The Fox Float DPS Performance shock brings 100 mm of travel to our Split Pivot suspension design for efficient pedaling, predictable braking, and unshakeable traction. The RockShox SID Select+ fork delivers 120 mm of travel up front to help handle rock gardens and roots. With on-bike cargo features such as two-bottle capacity and top tube mounts, Spearfish keeps all your ride essentials at hand so you can focus on the trail ahead, not fumbling with a pack. Shimano's trusted SLX 1 x 12 drivetrain shifts smoothly through its wide gear range, so you won't be thrown off your rhythm by a bad shift.

Rustler C SLX is a 27.5 full suspension mountain bike with a focus on maximizing trail fun. A carbon frame, 27.5" wheels, and geometry designed for a lively ride means this is a bike that comes ready to play. Rustler uses a Split Pivot suspension design for 130 mm of rear travel that is supple over small bumps, supportive on bigger hits, and delivers traction when braking, accelerating, and climbing technical terrain so you're less likely to spin out. Rustler also comes with space for a full-size water bottle and a top tube mount that accommodates all manner of ride accessories. Shimano's proven SLX drivetrain and four-piston brakes keep every ride smooth and reliable. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. ON-BIKE STORAGE: Salsa innovated new bottle and accessory mount placements for added utility and ride range. Our gravel and road bikes have mounts on the top tube and underside of the down tube, plus up to five additional bottle mounts for extra hydration, ride accessories, and bikepacking gear. Our mountain bike line features top tube mounts, mounts on the underside of the down tube on hardtail models, and space for multiple bottles on hardtails and select suspension bikes. FRAME PROTECTION: We use various materials to protect our frames and forks from damage, whether it’s a rock strike on the trail or thick, abrasive mud on your favorite gravel route.

Cassidy SLX is built for more than just getting downhill the fastest. Sure, the 6061-T6 aluminum frame is up for all the trail punishment you can put it through. And the RockShox Super Deluxe Select+ shock and ZEB R fork have your back with 165 mm rear and 180 mm of suspension travel on tap. Cassidy's geometry and our Split Pivot suspension design ensure your tires stick to the trail, whether you're hurtling downhill or climbing back up for another lap. Unlike other enduro bikes, Cassidy features on-bike storage, such as a tube strap spot, a top tube mount, and full-size bottle mount. This lets you extend your ride time or just get the sweaty pack off your back. With a Shimano SLX 1 x 12 drivetrain and four-piston brakes, you're equipped for any enduro course or trail day. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. Flip Chip 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry.

Cutthroat C GRX 810 2x is an immensely capable carbon bikepacking bike, designed and built to be a tour de force on the Tour Divide. Cutthroat's lightweight carbon frame with Class 5 VRS offers a finely tuned blend of stiffness for pedaling efficiency and compliance for all-day comfort. Cutthroat's drop-bar mountain bike geometry is stable when picking your way down steep, loose descents but aggressive enough for enduring a full day of headwinds. Ample cargo mounts add versatility to the way you pack. Shimano's refined GRX 810 2x drivetrain delivers effortless shifting and braking and a wide gear range so you can focus on the view.

Cutthroat brings speed to the mixed surface, ultra-endurance bikepacking race scene. Every aspect was designed to obliterate long-distance cycling route records. An evolutionary leap in all-road bikes, Cutthroat lets you ride long, hard, and fast in comfort. The full-carbon frame and fork deliver race-winning efficiency and offer Salsa’s Class 5 Vibration Reduction System to reduce energy-robbing trail chatter. The DT Swiss CR 1600 wheels and Maxxis Ikon tires fly on fire roads and stand up to hours-on-end punishment, all while keeping rolling resistance and rotating weight down so you can keep pushing. The Cutthroat’s SRAM Force 1x11 drivetrain with carbon crank offers secure, streamlined efficiency with a wide gear range shifted by SRAM’s crisp DoubleTap shifting to maintain speed and momentum in widely variable terrain. And, Force hydraulic disc brakes deliver ruthless stopping power with precise modulation and a lightweight design; everything you want in a race-ready braking system.

Warbird is Salsa's gravel race bike, built on years of experience racing in some of the nation's premier gravel events. Its carbon fiber frameset, our carefully-honed gravel race geometry, and plentiful mounts for water, tools, and accessories make Warbird a top contender in the gravel bike world. - High-modulus carbon frame with rear thru-axle dropouts and rear rack compatibility via Rack-Lock seat collar (sold separately) - Class 5 Vibration Reduction System (VRS) reduces fatigue caused by micro-impacts - Waxwing Deluxe carbon fork features a 12 x 100 mm thru-axle, Three-Pack and fender mounts, mid-blade eyelets, dynamo cable routing, and flat-mount brake standard - Compatible with 700c (45 mm maximum) and 650b (51 mm maximum) wheels and tires - Compatible with 1x, 2x, and electronic drivetrains - Internal sleeved cable routing, dropper post-compatible - Three water bottle mounts in the main triangle on 56–61 cm frames; two on 49–54.5 cm frames - Top tube mount for Salsa EXP Series Direct Mount Top Tube Bag and additional mount on underside of down tube - Accommodates a 40mm travel suspension fork and dropper post with internal routing (on 1x drivetrains only)

A gravel ride can be whatever you want it to be: go for speed, go for distance, go for fun, go for an escape. No matter your goal, Warbird C GRX 810 2x is a comfortable and efficient way to get there. The carbon frame with Class 5 Vibration Reduction System (VRS) tames harsh roads. Our gravel race geometry grants you control on ruinous roads. Thoughtful mounting points provide places for everything from extra bottles to a light bikepacking setup. Shimano's GRX 810 2x drivetrain has proven itself as a dependable, high-performance gravel group with plenty of gear range for windy flats and steep climbs. Put it all together and you've got one of the best gravel bikes out there.

For those seeking more than just the "Lightest-stiffest-most aerodynamic" road bike experience, Warroad is just the thing. The agile and full-featured carbon fiber frameset is designed with Class 5 VRS for compliance and composure on the rough stuff. Warroad's endurance road geometry is designed for sustained rides, with ample frame and fork mounts for your all-day ride provisions. Designed to accommodate both 700c and 650b wheels, Warroad riders can set up a second wheelset for changing terrain or preferences. Add Shimano's Ultegra components, renowned for light and smooth shifting, and you've got an all-road bike that feels right in every way.

Blackthorn SLX is all-mountain with a side of adventure. The stiff and durable aluminum frame uses our progressive trail geometry for a ride feel that's equal parts downhill ripper and stable climber. The Split Pivot suspension design builds on those qualities with supple-to-supportive travel linked to a 140 mm RockShox Super Deluxe Select+ shock. Paired with a 160 mm RockShox Yari RC fork, Blackthorn has the chops for those rugged lines you've been eyeing. On-bike cargo features like the integrated down tube strap, top tube mounts, and a bottle mount let you keep the ride essentials on your bike rather than your back. Shimano's SLX componentry means a smooth-shifting 1 x 12 wide-range drivetrain, while the four-piston brakes offer all the stopping power you'll need. Blackthorn is a clever and capable rig that brings a lot to the all-mountain table. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. Purpose-Tuned Suspension The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. Progressive Geometry Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. Flip Chip 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS Carbon Main Triangle with Carbon Seatstays and Aluminum Chainstays EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. Top Tube Accessory Mounts Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. Down Tube Three-Pack Mounts Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. Integrated Repair Kit Location Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) Accommodates a 26 oz Bottle All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. Internal Sleeved Cable Routing Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. Molded Frame Protection Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. Chain Guide-Compatible Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). Stealth Dropper Post Routing Compatible with 30.9mm dropper posts for true trail bike performance. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry.

Warbird is Salsa's gravel race bike, built on years of experience racing in some of the nation's premier gravel events. Its carbon fiber frameset, carefully-honed gravel race geometry, and plentiful mounts for water, tools, and accessories make Warbird a top contender in the gravel bike world.

The Mukluk is Salsa's most versatile fat bike, designed and engineered to excel in a wide variety of conditions. The frame utilizes 197mm rear spacing to accommodate up to 5" tires, and the 100mm threaded bottom bracket allows a wide range of crank (Q-factor) choices. Alternator 1.0 dropouts allow for short chainstays and easily support single speed or geared drivetrain options. The Mukluk can do it all.

Blackthorn SLX is our 29er all-mountain bike that's perfect when you're not sure what trail has in store, but you know it's going to be steep, gnarly, loose, or all of the above. Progressive geometry comes to life in a 6061-T6 aluminum frame that's built to last. The 140mm rear shock and 160mm fork make for a smooth, balanced, controlled ride when the trail is anything but. Our tried-and-true Split Pivot suspension system delivers superb small-bump compliance, remarkable climbing ability, and limitless traction, even during braking. Shimano's SLX drivetrain and four-piston brakes are exactly the copilots you want when navigating hair-raising rock gardens, high-speed descents, and stiff climbs. Blackthorn SLX is the tool of choice for all-mountain adventures.

Cassidy is the natural evolution of our Split Pivot lineup. The aluminum frame is engineered for hard-charging on huge terrain, and its progressive geometry with 165mm of rear travel and a 180mm RockShox ZEB fork takes the edge off of burly rock gardens, daunting drops, and steep and sketchy trails. The Split Pivot suspension system adds pedaling efficiency and offers smooth, consistent braking throughout the travel for maximum traction. Shimano's SLX components round out the package for precise shifting, while four-piston brakes bail you out of any situation. Cassidy SLX is made for pulling off smooth moves when the terrain is anything but.

Beargrease pairs a race-ready carbon frame with the capability of fat tires for the ultimate groomed-trail machine. Its trail geometry, dropper post, and 27.5" wheels grant you confidence in loose corners and descents and make for an all-season ripper. Frame and fork mounts for extra bottles and cargo make it easier to gear up for your long days out or even overnighters, and the high-performance XT/SLX drivetrain is the icing on the cake. For light-and-quick confidence on any terrain, Beargrease is one of the best carbon fat-tire bikes out there.

Horsethief is one bike for many trails. From finessing local loops to savoring new destinations, Horsethief has your back. It's capable of pushing through technical terrain, instills confidence while riding aggressively, and pairs well with beautiful vistas and a post-ride beverage. - Wheel Size: 29", 27.5+ - Front Axle: 15mm Thru x 110mm - Brake Type: Disc - Fork Type: Suspension - Frame Material: Aluminum - TT (Effective): 636 - Rear Axle: 12mm Thru x 157mm - Frame Type: Suspension - Aluminum frame and Split Pivot suspension design with 120mm of efficient travel, remaining fully active under braking while supportive throughout its travel, paired with a 140mm suspension fork - A short stem paired with a long top tube, combined with a 67-degree head tube angle provides descending confidence, yet balances overall wheelbase length and slow speed maneuverability - Every size fits two full-size bottles in the triangle; Anything Bracket and top tube mounts boost cargo space for pack-free riding bliss - Super Boost 157 x 12mm rear hub spacing combined with a standard width bottom bracket results in a 432mm chainstay length that's 5mm shorter than previous-generations - Rear flip chip adjusts head tube angle and bottom bracket height for terrain, wheel size, and personal preference - Spec'd with a 29 x 2.5'' front and 2.4" rear wheel/tire combination, but can accommodate a range of additional sizes of 27.5 x 2.8 - 3.0" and 29 x 2.2 - 2.6''

Spearfish SLX is part racer, part rowdy. A 6066-T6 aluminum frame holds up to trail abuse, frame bag strap wear, long miles, you name it. Our progressive XC geometry makes descending easy and climbing efficient. Rocky, technical trails are no sweat, thanks to the efficient pedaling, predictable braking, and traction of our Split Pivot suspension design. A 100 mm Fox Float DPS Performance shock and the 120 mm RockShox SID RL fork mellow out harsh trails to reduce fatigue on long rides. Spearfish's on-bike cargo features, such as two-bottle capacity and top tube mounts, allow for longer rides between resupply points or just an extra lap before heading back to the car. Add Shimano's SLX 1 x 12 components to the mix, and you have an aluminum XC bike that you can rely on through tough racecourses and mellow loops alike.

Rustler SLX is designed from the ground up to be a playful trail bike. An aluminum frame, responsive trail geometry, and the agility of 27.5" wheels mean you can get creative with the trail features. Rustler's Split Pivot suspension design makes the most of its 130 mm of rear travel and is active while accelerating, braking, and climbing for reliable traction. Shimano's SLX drivetrain performs smoothly ride after ride, and the four-piston hydraulic brakes bring the action to a halt when you need it. With space for a full-size water bottle and a top tube mount for ride accessories, it's easier to keep the fun rolling. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. ON-BIKE STORAGE: Salsa innovated new bottle and accessory mount placements for added utility and ride range. Our gravel and road bikes have mounts on the top tube and underside of the down tube, plus up to five additional bottle mounts for extra hydration, ride accessories, and bikepacking gear. Our mountain bike line features top tube mounts, mounts on the underside of the down tube on hardtail models, and space for multiple bottles on hardtails and select suspension bikes. FRAME PROTECTION: We use various materials to protect our frames and forks from damage, whether it’s a rock strike on the trail or thick, abrasive mud on your favorite gravel route.

Beargrease is our fat tire bike built to go faster than you knew fat tire bikes could go. The super-light frame and fork and the sure-footed rollover of 27.5 x 4.0" wheels and tires cover challenging terrain quickly. Versatile frame and fork mounts let you carry everything you need for the backcountry. Test yourself in a snowy endurance race or pack your camping gear and embark on a long-distance overnight bike trip.

What is the best all-mountain bike? The one you build yourself. Start with the terrain-taming Blackthorn Carbon frame, designed around our efficient Split Pivot suspension platform and equipped with a Fox Float DPX2 Factory shock for 140mm of rear travel. Add all of your favorite components and watch your dream bike take shape, then go ride your creation on all the new and gnarly trails you can manage. Blackthorn is the perfect partner for big miles on big mountains.

The Blackthorn C frame blends a stiff carbon fiber chassis with our progressive trail geometry and Split Pivot suspension design. The result is a well-balanced platform for an all-mountain bike that descends with gusto, rails through features, and makes climbing up for lap two as painless as possible. The Fox Float X Factory shock delivers 140 mm of travel to guide you through whatever the trail serves up. On-bike cargo features hold your tube, pump, and repair kit, and more on the frame to lighten up your hip pack—or allow you to ride pack-free. We made Blackthorn C the best all-mountain bike frame around. Take it and make it your dream bike.

Nobody knows what you like as well as you do. When you're hurtling down the trail at high speed, everything needs to be dialed. With 165mm of rear travel, plus our Split Pivot suspension system for pedaling efficiency and consistent braking traction, Cassidy is easy-up, easy-down. Take the Cassidy Carbon Frame, hand-select your dream team of parts, and build the enduro sled you've always wanted.

Stormchaser is Salsa's gravel bike for any and all conditions. Ample tire clearance and the single speed-compatible Alternator Flat Mount dropout system will see you through the muddiest rides. Equipped with a suspension fork and dropper post, the Stormchaser GRX 810 1x SUS lets you get rowdy with your route choices.

Salsa Blackthorn Deore brings together performance and adventure. The aluminum frame is stiff enough to keep you on your line and durable enough to toss in a truck bed for shuttling. Our progressive geometry and Split Pivot suspension design offer a well-balanced platform for pedaling, descending, and taking on technical features. A 140 mm RockShox Super Deluxe Select shock and 160 mm RockShox 35 Gold RL fork ensure plenty of travel for gnarly drops, gaps, and other features. On-bike cargo features like a down tube strap, top tube mounts, and a bottle mount let you keep the weight of your ride gear down low on the frame so you're free to move your body without the burden of a pack. With Shimano's robust Deore 1 x 12 drivetrain backing you up, you'll find very few limits out there. Blackthorn Deore is the 29er all-mountain bike for big rides on diverse terrain. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. PURPOSE-TUNED SUSPENSION The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. PROGRESSIVE GEOMETRY Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. FLIP CHIP 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS CARBON MAIN TRIANGLE WITH CARBON SEATSTAYS AND ALUMINUM CHAINSTAYS EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. TOP TUBE ACCESSORY MOUNTS Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. DOWN TUBE THREE-PACK MOUNTS Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. INTEGRATED REPAIR KIT LOCATION Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) ACCOMMODATES A 26 OZ BOTTLE All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. INTERNAL SLEEVED CABLE ROUTING Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. MOLDED FRAME PROTECTION Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry. CHAIN GUIDE-COMPATIBLE Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). STEALTH DROPPER POST ROUTING Compatible with 30.9mm dropper posts for true trail bike performance.

Expand your gravel adventures with the Confluence GRX600 2x. This gravel e-bike features a lightweight MAHLE hub-drive system that puts down 40Nm of torque in a stealthy package. The aluminum frame and carbon fork balance weight, comfort, and performance. Confluence’s geometry is designed for a comfortable, stable ride, even at higher average speeds than you’re used to on bumpy backroads. Confluence also comes with our on-bike cargo features, allowing for quick and easy configuration for adventures ranging from gravel day rides to last-minute bikepacking trips. All this, paired with Shimano’s GRX600 2x drivetrain, means you’ll have the tools to pull off more rides than ever. Charge Your Adventure with Confluence GRX600 1x. Features: - 6061-T6 alloy frame Confluence’s aluminum alloy tubing is developed specifically for the Confluence frame and is heat-treated to T6 alloy standards for extra strength and durability. - Carbon fiber fork The Confluence Carbon fork is lightweight, comfortable, cargo-ready, and gives you loads of tire clearance to play with. - MAHLE X35+ Class 1 hub-drive system This Class 1 rear hub-drive motor delivers electric assist up to 20mph/32kph. It’s one of the lightest e-bike systems on the market, and its low-profile appearance means that Confluence looks like a regular gravel bike. - 40Nm max torque Up to 40Nm of assist that feels natural, not overwhelming. The MAHLE X35+ system offers three assist levels, and sensors detect when you’re pedaling to moderate the level of support generated at the hub. - 250Wh internal battery You can’t see it, but you’ll certainly feel it. MAHLE’s 250Wh battery is nestled inside Confluence’s downtube. This battery size hits the ideal combination of efficiency and weight for what we designed Confluence to do - Capable of up to 458Wh with MAHLE Range Extender battery? (sold separately) Easily increase your range for bigger adventures with a Range Extender battery available from MAHLE. - iWOC One compact remote top tube controller Minimal and intuitive controller displays battery status and allows you to cycle through assist modes with one button. - Connected if you want to be The MAHLE system offers Ant+ connectivity for third-party devices and Bluetooth® for app integration. MAHLE’s MySmartBike app allows for customization, metrics, mapping, and more. - Massive 700c x 50mm tire clearance Confluence fits up to 700c x 50mm tires, so you can ride those lesser-traveled tracks. 700c x 42mm maximum tire clearance when equipped with fenders. - On-bike cargo features Attach front and rear racks to your Confluence for serious cargo capacity, or use the sleeker Three-Pack mounts for extra water bottles or our EXP Series Anything Cage HD to pack a cooking kit, extra layers, or whatever dream up.

Built for the rigors of America's longest mountain bike race, the Tour Divide-inspired Cutthroat C GRX 600 1x is one of the best bikepacking bikes for long rides through a variety of conditions and surfaces when speed is of the essence. Designed with drop-bar mountain bike geometry and a lightweight carbon frame featuring our Class 5™ VRS for comfortable compliance, Cutthroat is ready to put in big miles on any terrain. Ample cargo mounts let you distribute weight evenly around the bike for maximum maneuverability. Shimano's GRX 600 1x drivetrain provides brilliant braking and shifting with the gear range for gravel flats and mountain passes alike.

Spearfish SLX is a short travel 29er that threads the needle between a trail bike and XC bike. Its progressive XC geometry, combined with 120 mm front and 100 mm rear travel and our Split Pivot suspension system, makes for a ride that's efficient enough for ultra-endurance races but fun enough for weekend trail sessions with friends. Spearfish SLX is built on a frame made of double- and triple-butted, heat-treated 6066-T6 aluminum tubing for durability and stiffness. Tying it all together is Shimano's SLX drivetrain with a wide gear range and smooth performance, so you can focus on the trail ahead.

Warbird is Salsa's gravel race bike, built on years of experience racing in some of the nation's premier gravel events. Its carbon fiber frameset, our carefully-honed gravel race geometry, and plentiful mounts for water, tools, and accessories make Warbird a top contender in the gravel bike world. - High-modulus carbon frame with rear thru-axle dropouts and rear rack compatibility via Rack-Lock seat collar (sold separately) - Class 5™ Vibration Reduction System (VRS) reduces fatigue caused by micro-impacts - Waxwing carbon fork featuring a 12 x 100mm thru-axle, Three-Pack and fender mounts, mid-blade eyelets, dynamo cable routing, and flat-mount brake standard - Compatible with 700c (45 mm maximum) and 650b (51 mm maximum) wheels and tires - Compatible with 1x, 2x, and electronic drivetrains - Internal sleeved cable routing, dropper post-compatible - Three water bottle mounts in the main triangle on 56–61 cm frames; two on 49–54.5 cm frames - Top tube mount for Salsa EXP Series Direct Mount Top Tube Bag and additional mount on the underside of the down tube - Accommodates a 40mm travel suspension fork and dropper post with internal routing (on 1x drivetrains only)

Built for chasing both winter-ultra finish lines and backcountry campsites, Beargrease combines the efficiency of a carbon fiber frameset with the capability of multiple cargo mounts and 27.5 x 4.0" tires. Shimano's trusted SLX 1 x 12 drivetrain ties the package together with efficiency and reliability. Beargrease is designed to push the limits of the fat bike—snow, sand, and singletrack are now more accessible and more fun than ever. High-Modulus Carbon Fiber Frame This material offers improved stiffness, better vibration damping, excellent durability, and weight savings compared to other frame materials. Beargrease Geometry 440mm chainstays, longer front/center, short stems, and wide bars create room to move and add confidence while maneuvering on tight trails. Standover height is improved, allowing the addition of an X-Small frame size. This geometry results in a fat bike that rides like a trail bike. It is stable, steers well in loose conditions, and still remains nimble and agile despite the massive wheels and tires. A low bottom bracket height is also key, keeping the rider's center of gravity low, and making dabbing, dismounting, and remounting easier. 27.5 x 4.0" Wheel & Tire Size Beargrease rolls on 27.5 x 3.8" wheels and tires. For groomed snow or dirt, the increase in diameter provides increased rollover, a longer contact patch, and the flotation of a 4.0" tire without added rolling resistance. Kingpin Deluxe Fork Featuring a full carbon design, the Kingpin Deluxe Fork is lightweight and durable, and features an amazing array of accessory bosses to help you make the most of your Beargrease fat bike: - Dual sets of Three-Pack bosses on each leg accept bottle cages or our Anything Cage accessory - Lowrider mounts work with our Down Under front rack for a traditional touring setup - Internal dynamo hub wire routing keeps the front end clean for those upgrading to dyno hubs - 150 x 15mm thru-axle design boosts stiffness and aids in solid tracking on the trail

Blackthorn Deore 12-speed is a 29er all-mountain bike well-suited to a wide variety of trails. With a durable 6061-T6 aluminum frame, 140mm rear shock, and 160mm fork, it's prepared for intense descents and technical sections. Our Split Pivot suspension platform pedals exceptionally well and maintains traction even while braking through your full range of travel. Shimano’s Deore 12-speed drivetrain has the range for lung-busting climbs, while the four-piston brakes keep you from busting anything else. Blackthorn Deore 12-speed is your all-mountain accomplice.

The Fargo is Salsa’s original drop bar mountain bike. A bit of a cult classic, it’s designed for mixed surface riders and bikepackers that like variety in their routes, with the capability to carry everything needed when out for days on end. Carefully crafted in 3/2.5 seamless triple-butted Titanium tubing, paired with Salsa’s new Firestarter Carbon boost fork, this frameset is ready for any dream-bike build. - Titanium tube set provides appropriate stiffness and compliance for fantastic ride quality - Alternator Dropouts v1.5; split-able version of the renowned Alternator Dropout for ultimate drivetrain versatility, including belt drive and singlespeed setups - Adjustable rear spacing can accommodate 27.5+ or 29-inch wheels, and on sizes Small to X-large, 29+ - Firestarter 110 Carbon Deluxe boost fork features high modulus carbon construction, tapered steer tube and four sets of Three-Pack mounts to offer incredible load-carrying possibilities. Mid-blade mounts for low rider racks. Internal routing for Boost spacing Dynamo hubs and fender mounts (compatible with 29 x 2.2-inch tire maximum clearance) - Fork now has a 51mm offset and is designed for 180mm maximum rotors, with tire clearance for 27.5 x 2.8-3.0-inch or 29 x 2.2 – 3.0-inch sizes - Frameset includes front and rear Salsa Deadbolt Ultralight thru-axles, Cane Creek 40 Headset and Salsa Lip-Lock seat collar